For Sale: Power tank, brackets, shocks etc - Austin, TX
#1
Power tank, brackets, shocks etc - Austin, TX
I still have some wheelin junk taking up space in my garage. I would prefer not to ship the power tank but i guess i could if you made it worth my time. I'll be in College Station and Houston the weekend of the 16th.
$350 for the Power Tank. Its basically the "B" package but i lost the regulator cover.
-15# Tank
-Mounting bracket
-200psi HPx regulator
-Tank boot
-25' Braided 3/8 hose.
They go for $480 from Power Tank and $540 from Poly.
POWERTANK - CO2 Air Systems
Poly Performance Inc.*::*CO2 & Nitrogen Kits*::*Powertank CO2 & Nitrogen Kits*::*Comp Series 15 lb. System - Jeep JK Synergy Suspension Systems, Fox Racing Shox, Beard, CTM, Johnny Joints®, Currie Enterprises, Edelbrock, Total Chaos, Ramsey Winch, Wa
Next is a pair of 5125 12" Blistein shocks. $100
-They're still in great condition, with the limit straps and stupidly huge bump stops they never maxed out in either direction.
-29.70" extended 17.91" compressed.
-no boots.
"1 ton TRE" from PSC - $350 shipped.
-Left hand thread, 7/8-18
-I don't have the jam nut or weld in bung.
(TR-ES-492201) Heavy Duty Tie Rod End LH [TR-ES-492201] - $42.00 : PSC Motorsports, Off-Road Steering Experts
Then a few rackets from Ballistic I've had laying around, I never had a chance to change over to coils on the Ranger. If there's bolts/nuts in the picture it'll come with it.
I had almost all the brackets I needed to convert to coils. Just needed coils, another 3" ballistic joint, tube to extend radius arms andddd *think* thats it. I'm just selling this stuff now cause *if* i get back into wheelin, first of all its gonna be a while, second i doubt I'll have a rig that'll need any of these parts. Obviously if you wanted to use them for a 3 link you would still need lower axle brackets, lower axle end rod ends, tube, upper link pocket, upper link axle mount, upper link rod ends and tube.
2x HD Frame link mounts. $45 shipped
-3" Wide with 3/4" holes for the ballistic joint.
Heavy Duty Frame Link Mount
1x 3" Forged Ballistic Joint - $65 shipped
-1.25"-12 Shank
-no tube adapter
3.0" FORGED Ultra Duty BALLISTIC joint
Adjustable Coil spring buckets with retainers - $85 shipped
-For use with 5.5" springs
Coil spring retainer
Adjustable coil buckets
$350 for the Power Tank. Its basically the "B" package but i lost the regulator cover.
-15# Tank
-Mounting bracket
-200psi HPx regulator
-Tank boot
-25' Braided 3/8 hose.
They go for $480 from Power Tank and $540 from Poly.
POWERTANK - CO2 Air Systems
Poly Performance Inc.*::*CO2 & Nitrogen Kits*::*Powertank CO2 & Nitrogen Kits*::*Comp Series 15 lb. System - Jeep JK Synergy Suspension Systems, Fox Racing Shox, Beard, CTM, Johnny Joints®, Currie Enterprises, Edelbrock, Total Chaos, Ramsey Winch, Wa
Next is a pair of 5125 12" Blistein shocks. $100
-They're still in great condition, with the limit straps and stupidly huge bump stops they never maxed out in either direction.
-29.70" extended 17.91" compressed.
-no boots.
"1 ton TRE" from PSC - $350 shipped.
-Left hand thread, 7/8-18
-I don't have the jam nut or weld in bung.
(TR-ES-492201) Heavy Duty Tie Rod End LH [TR-ES-492201] - $42.00 : PSC Motorsports, Off-Road Steering Experts
Then a few rackets from Ballistic I've had laying around, I never had a chance to change over to coils on the Ranger. If there's bolts/nuts in the picture it'll come with it.
I had almost all the brackets I needed to convert to coils. Just needed coils, another 3" ballistic joint, tube to extend radius arms andddd *think* thats it. I'm just selling this stuff now cause *if* i get back into wheelin, first of all its gonna be a while, second i doubt I'll have a rig that'll need any of these parts. Obviously if you wanted to use them for a 3 link you would still need lower axle brackets, lower axle end rod ends, tube, upper link pocket, upper link axle mount, upper link rod ends and tube.
2x HD Frame link mounts. $45 shipped
-3" Wide with 3/4" holes for the ballistic joint.
Heavy Duty Frame Link Mount
1x 3" Forged Ballistic Joint - $65 shipped
-1.25"-12 Shank
-no tube adapter
3.0" FORGED Ultra Duty BALLISTIC joint
Adjustable Coil spring buckets with retainers - $85 shipped
-For use with 5.5" springs
Coil spring retainer
Adjustable coil buckets
Last edited by 99ranger4x4; 01-04-2010 at 06:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
njdriver04
DOHC - 2.3L Duratec / Mazda L Engines
3
07-30-2019 10:37 AM
RicksTJR
OLD - Interior, Exterior, Electrical, & Misc.
8
08-15-2009 02:42 PM
08XLT4x4
OLD - Interior, Exterior, Electrical, & Misc.
5
04-30-2009 05:48 PM