For Sale: Ranger and Explorer parts for sale, NC - Ranger-Forums - The Ultimate Ford Ranger Resource


Interior, Exterior, Electrical, & Misc. Ford Ranger interior, exterior, and electrical parts, i.e. overhead consoles, speakers, lights, bumpers, doors, wiring. This sub-forum is also for ads which list multiple Ford Ranger items per thread.

Closed Thread
 
LinkBack Thread Tools Search this Thread
  #1  
Old 08-07-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Ranger and Explorer parts for sale, NC

I am going to pick up a 96 4.0l running exploder this week and I will be parting it out... Since my truck didnt sell on ebay, I will be parting it out from top to bottom as well. I dont have much info on the explorer yet, but once i pick it up, i will be posting pics... I dont have a lot of time to ship stuff, nor do i have a local ups or fedex...

The ranger will be parted out as people pay me for items...

I have a brand new(in box) soft tonneau cover, that is hinged as well, for a stepside bed.

JBA ceramic coated shorty headers(left side egr)

built 4.0 sohc short block with less than 20k miles: 8.8:1 .030 over wiseco forged pistons, arp head studs, race prepped rods, balanced rotating assembly, new timing chain cassettes, with oil pan, timing cover, and water pump

2006 mustang 5spd manual transmission with 6k miles on it(will bolt to the 4.0l

modified crossmember to accept the mustang trans

brand new ford ranger 5 speed pedal assembly

brand new clutch master cylinder(ford ranger)

the cab(with doors) and bed are for sale as well, they are painted to match, so I would recommend buying both...

I have a one off set of 4wd front spindles modified to fit 13in cobra brakes(rotors, calipers, and steel braided lines go with the spindles). The spindles have the outer joints from the cv shafts installed in the bearings, so these may work on 2wd trucks but it is YOUR responsibility to figure that out...

all the wiring harnesses are for sale

pcm: VQP0

sliding rear glass

non sliding rear glass

dash

steering wheel

steering column(manual)

air bags

pretty much everything else....

if you want to buy the frame with the irs suspension and the coilovers, with the cobra brakes, let me know before i tear it apart...

I do have the title for the truck.

If you are interested in any of the parts, pm me for more info!!!




















Attached Thumbnails
Ranger and Explorer parts for sale, NC-n582503347_911095_5606.jpg   Ranger and Explorer parts for sale, NC-n582503347_911086_3599.jpg   Ranger and Explorer parts for sale, NC-n582503347_911097_6066.jpg   Ranger and Explorer parts for sale, NC-n582503347_1098565_2255.jpg   Ranger and Explorer parts for sale, NC-n582503347_1098566_2524.jpg  

Ranger and Explorer parts for sale, NC-8121_155637828347_582503347_2647668_4321361_n.jpg   Ranger and Explorer parts for sale, NC-8121_155637848347_582503347_2647669_5818766_n.jpg   Ranger and Explorer parts for sale, NC-8121_155637858347_582503347_2647671_3498138_n.jpg   Ranger and Explorer parts for sale, NC-8121_155637963347_582503347_2647685_7318391_n.jpg   Ranger and Explorer parts for sale, NC-21578_306876653347_582503347_3392813_7957252_n.jpg  


Last edited by NicksterSVT; 08-07-2011 at 09:27 PM.
  #2  
Old 08-07-2011
Clinton's Avatar
Member
iTrader: (19)
 
Join Date: Dec 2010
Location: PA.
Posts: 1,417
pic of the steering wheel?
  #3  
Old 08-07-2011
Member
iTrader: (2)
 
Join Date: Jun 2011
Location: GA
Posts: 8
Hmmmm, diggin the paint scheme would have been a awesome truck, Hey on a side note how much for the bed?
  #4  
Old 08-07-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
ill have to get a pic of the wheel when i get home tonight.

as far as the bed, as you can see in the pix, there is no fuel filler cap anymore(it has been shaved) as well as the holes where the factory steps snap into the bed... there are also two big holes cut in the center of the floor of the bed for the battery box and fuel cell access... the roll pan is a sir michaels steel pan. I would like to get 500 for the bed, but I am open to offers
  #5  
Old 08-07-2011
Taylor's Avatar
Ive been dubbed....an old volk
iTrader: (18)
 
Join Date: Mar 2010
Location: Nashville, NC
Posts: 7,110
...........Ill take the entire truck..........ill make payments..............
  #6  
Old 08-07-2011
Bumpncarstereo's Avatar
Member
iTrader: (3)
 
Join Date: Aug 2006
Location: btwn the Buff and the Roc
Posts: 1,302
pm coming you way
  #7  
Old 08-07-2011
hurley's Avatar
Member
iTrader: (3)
 
Join Date: Dec 2010
Location: West Belmar NJ
Posts: 1,488
How much were you trying to sell it for on eBay?
  #8  
Old 08-07-2011
morris's Avatar
RF Veteran
iTrader: (5)
 
Join Date: Feb 2008
Location: South Detroit.
Posts: 7,833
Why you parting it out again?
  #9  
Old 08-07-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by hurley View Post
How much were you trying to sell it for on eBay?
starting price was 4500
  #10  
Old 08-07-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by Taylor View Post
...........Ill take the entire truck..........ill make payments..............
you can make payments until you have paid for the truck, then you can come get it!
  #11  
Old 08-07-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by morris View Post
Why you parting it out again?
got a baby on the way... i own too many vehicles... fixin to expand my shop and i need it out of there!!!
  #12  
Old 08-07-2011
zabeard's Avatar
who?
iTrader: (8)
 
Join Date: Nov 2004
Location: IN
Posts: 26,045
Bump. I wish I had the funds to finish the truck and buy it. It's quality work guys.
  #13  
Old 08-08-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
I also forgot to add that I have most of the accessories for the engine, the stock intake, stock front sway bar, LARGE front sway bar, and a whole bunch of extra 4.0 sohc engine parts...
  #14  
Old 08-08-2011
Member
iTrader: (2)
 
Join Date: Jun 2011
Location: GA
Posts: 8
man that beds too nice for what i want didnt realize all you have done to it but free bump for you that is going to make someone a awesome ride if they buy it and finsh it!
  #15  
Old 08-08-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by FIREBALL 00 View Post
man that beds too nice for what i want didnt realize all you have done to it but free bump for you that is going to make someone a awesome ride if they buy it and finsh it!
thanks. i wish someone would buy it so i can get the ball rollin on the rest of my stuff
  #16  
Old 08-09-2011
seed60's Avatar
RF Veteran
iTrader: (15)
 
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
If you can't sell it all together. How much for the passenger fender?

Got any sonic blue paint?
  #17  
Old 08-10-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by seed60 View Post
If you can't sell it all together. How much for the passenger fender?

Got any sonic blue paint?
i really hate to sell just one fender... the holes have been welded and a lot of time has been spent on them...
  #18  
Old 08-11-2011
The SuperDookie Ranger's Avatar
Member
 
Join Date: Aug 2010
Location: Cincinnati, Ohio
Posts: 817
How much you want for the shortblock? How much for the front suspension?

Last edited by The SuperDookie Ranger; 08-11-2011 at 09:12 AM.
  #19  
Old 08-11-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by The SuperDookie Ranger View Post
How much you want for the shortblock? How much for the front suspension?
800 for the short block, what all do you want from the suspension?
  #20  
Old 08-11-2011
The SuperDookie Ranger's Avatar
Member
 
Join Date: Aug 2010
Location: Cincinnati, Ohio
Posts: 817
alright, and pretty much the whole setup, coilovers, Upper and Lower control arms, brakes, ect.
  #21  
Old 08-11-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by The SuperDookie Ranger View Post
alright, and pretty much the whole setup, coilovers, Upper and Lower control arms, brakes, ect.
i have two sets of springs for the coilovers, 550lb and 600lb, i purchased the needle bearings for the springs to aid with adjustment, and the steel inserts for the ends. i have over 400 bucks in the coil overs, the brakes, well... thats another big expense(since they are 1 off)... if you purchase everything, i will tell you what rotors i am using(they have to be redrilled for the 5 on 4.5 bolt pattern. the spindles had to be machined for an offset insert for the cobra brackets(plus an additional bracket had to be made) and the steel braided lines are custom. I have hawk brake pads to go with them, the rotors are coated power slot(300 bucks alone), and the calipers and stuff run around 400 bucks.... i would take 900 bucks for everything. the lca's have new bushings, the driver side uca is brand new, i didnt purchase a new one for the right side(i dont think)... everything will work with the factory ranger master cylinder. i spent a lot of time doing r&d on this front setup, so 900 bucks is a freakin steal!

edit: that does NOT include shipping!
  #22  
Old 08-11-2011
The SuperDookie Ranger's Avatar
Member
 
Join Date: Aug 2010
Location: Cincinnati, Ohio
Posts: 817
Yea a steal for sure, I doubt ill end up getting anything for the suspension. Let me check my funds tmrw cause I'm def interested in the short block. Were you running performance heads on that motor or were they stock?
  #23  
Old 08-11-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by The SuperDookie Ranger View Post
Yea a steal for sure, I doubt ill end up getting anything for the suspension. Let me check my funds tmrw cause I'm def interested in the short block. Were you running performance heads on that motor or were they stock?
i have a set of super six stage 3 heads with crower cobra springs and retainers, 1mm oversized stainless steel valves, and so forth, but i robbed an exhaust valve, spring, retainer, and im not sure if the lifter and follower is missing as well, for a customers vehicle... you can buy replacement parts from super six, im sure he will sell individuals. i have a set of stock cams as well... stock intake, im not sure if i have any injectors other than 19lbers... i was running 60lb injectors, but they went into a customers vehicle as well...
  #24  
Old 08-11-2011
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
if you buy the motor, i will throw in all of the spare 4.0 parts that i have...
  #25  
Old 08-13-2011
Kris03's Avatar
Member
 
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
got those headers still?
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
For Sale: For sale/trade/buying Ranger and Explorer parts Goofs04Edge Interior, Exterior, Electrical, & Misc. 5 03-06-2015 10:08 PM
For Sale: Misc. Ranger Parts 4 Sale in Southern IN - Door parts, A.R.E Lid, 16x7 Rims, & more.. Hillyard Suspension, Tires, & Wheels 22 10-05-2009 11:02 PM
3.0L & 4.0L Ranger/Explorer Parts for sale (GA) USMCWHITENER Interior, Exterior, Electrical, & Misc. 7 05-15-2009 05:42 PM
FX2.3's Garage Sale!!! Ranger Parts, CDs, DvDs, Books, Games, Hammock, and more! (TX) FX2.3 Interior, Exterior, Electrical, & Misc. 13 04-19-2009 12:56 AM
30 MPH accident and my ranger it totaled....A few parts for sale. RNGMSTR DOHC - 2.3L Duratec / Mazda L Engines 37 04-18-2008 06:05 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 06:25 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.