metal coating
#1
#2
Old Guy User…
iTrader: (12)
Problem with white metals is they create their own coating for protection…
Clean the white metal really well with a pint thinner or at least the Pre-sol pre-cleaner.
Let it dry and don’t touuch it and then spray it with DupiColor Etching Primer, two light coats evenly sprayed but not too much.
Then you should be able to put on DupliColor Paint in any color you want.
As far as Tough Liner (is this a Bed Liner) I do not know if it is fully compatible with the Etching Primer but read up on it and see the Tough Liner requirements before using.
Good Luck
Clean the white metal really well with a pint thinner or at least the Pre-sol pre-cleaner.
Let it dry and don’t touuch it and then spray it with DupiColor Etching Primer, two light coats evenly sprayed but not too much.
Then you should be able to put on DupliColor Paint in any color you want.
As far as Tough Liner (is this a Bed Liner) I do not know if it is fully compatible with the Etching Primer but read up on it and see the Tough Liner requirements before using.
Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
winks
Ranger Products, Company, & Member Reviews
14
09-16-2006 06:44 AM