When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
while tapping into the dome light i broke the clip off to where it attaches to the cab and now that its all plugged in i might of blown a fuse? the dome light is not turning on or anything? any suggestions?
its the 2 plugs that go to the domelight, i broke them off the clip when taking out the light, and its plugged in with no domelights or ohc lights working
check your fuses, might have popped one. if you plugged it back in atleast the truck d/l should work. Maybe you shorted something when you tapped the OHC lights to it.
weird, works for me. I dont think we have spares. Just look for #26 fuse and make sure its not blown....if it is, pull a 10 from another spot and use that, if it pops again u have a short somewhere.
ok, replace with 10A, if it pops, you have a problem....trace ur wires and make sure you have no exposed wires and everything is hooked up where it should be