Skulls into the cab !
#1
Join Date: Nov 2010
Location: Gto, MX
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Skulls into the cab !
Few months ago I decided to make a change in my cab and replaced the OEM shift **** for this red ball
After getting tired of that I decided to go with this new one:
And since I was already buying random things at Autozone I went for this lighter upgrade:
After getting tired of that I decided to go with this new one:
And since I was already buying random things at Autozone I went for this lighter upgrade:
Last edited by fitsector; 11-28-2011 at 08:42 AM.
#3
Join Date: Nov 2010
Location: Gto, MX
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Taking out the factory **** was a Royal Pain, I´ve heard from many fellas here that with the time (years) it just came off. But in my case (2010 truck) I had to use a hacksaw and destroy it completely after hours and hours of trying to pulling it out. (It has not thread or bolts, just pressure)
#9
Join Date: Nov 2010
Location: Gto, MX
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
When I installed the viper alarm, which came with electric locks... I decided to install a bypass with that switch to control de locks from the cab instead of only have them locked when I arm the alarm.
#11
So, your doors don't lock when you start the truck and the doors are closed?
#12
Join Date: Nov 2010
Location: Gto, MX
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Nop, actually all the functionality of the alarm remains the same, I only added an electric control
Below the current opeation of the alarm:
- When I turn on the truck, the doors get locked
- If I turn on the truck and one door is open, then the locks remains open
- When I turn off the truck, the doors locks open
- And of course I have the regular Alarm operation (Alarm Armed - Doors Locked, Alarm Disarmed - Doors Unlocked)
Below the current opeation of the alarm:
- When I turn on the truck, the doors get locked
- If I turn on the truck and one door is open, then the locks remains open
- When I turn off the truck, the doors locks open
- And of course I have the regular Alarm operation (Alarm Armed - Doors Locked, Alarm Disarmed - Doors Unlocked)
#14
Nop, actually all the functionality of the alarm remains the same, I only added an electric control
Below the current opeation of the alarm:
- When I turn on the truck, the doors get locked
- If I turn on the truck and one door is open, then the locks remains open
- When I turn off the truck, the doors locks open
- And of course I have the regular Alarm operation (Alarm Armed - Doors Locked, Alarm Disarmed - Doors Unlocked)
Below the current opeation of the alarm:
- When I turn on the truck, the doors get locked
- If I turn on the truck and one door is open, then the locks remains open
- When I turn off the truck, the doors locks open
- And of course I have the regular Alarm operation (Alarm Armed - Doors Locked, Alarm Disarmed - Doors Unlocked)
Thread
Thread Starter
Forum
Replies
Last Post
cas3214
General Ford Ranger Discussion
11
10-21-2023 09:53 PM