Cab swap dashboard info needed
#1
Cab swap dashboard info needed
Hi all. new here. I have a 94 B4000 4x4 4.0 and 5 speed with a rough cab, but decent drive train and 4 inch lift. I also have an 02 ranger with the 3rd door, 3.0 5 speed with a miss and my ex g/f tried her best to roll.
She slide into the ditch sideways in the winter, hit a snow bank and flipped the truck, landing directly on all 4 wheels. The bulk of the damage was suffered to the box and the drivers front fender. Cab suffered damage to the mirrors and windshield.
One of these trucks is going to have to go, as I now have 3 ( currently driving 98 B4000 4x4 ) Since the motor has a miss in the 02, and might need to be rebuilt or replaced and I would really like to keep the 94, my question is this.....
I know that the 02 ranger cab will go onto the 94 frame with minor mods to the front cab mounts, but I am wondering if the 94 dash will fit in the 02 cab???
I am already aware of electrical changes etc, but just want to know if the 94 dash itself will pretty much bolt into the 02 cab. My main reasoning behind this is because of the 02 dash doesn't have the selector for the 4wd and I don't really want to source an 02 4wd dash. Plus I wouldn't have to swap the electrical harnesses around in the dash.
She slide into the ditch sideways in the winter, hit a snow bank and flipped the truck, landing directly on all 4 wheels. The bulk of the damage was suffered to the box and the drivers front fender. Cab suffered damage to the mirrors and windshield.
One of these trucks is going to have to go, as I now have 3 ( currently driving 98 B4000 4x4 ) Since the motor has a miss in the 02, and might need to be rebuilt or replaced and I would really like to keep the 94, my question is this.....
I know that the 02 ranger cab will go onto the 94 frame with minor mods to the front cab mounts, but I am wondering if the 94 dash will fit in the 02 cab???
I am already aware of electrical changes etc, but just want to know if the 94 dash itself will pretty much bolt into the 02 cab. My main reasoning behind this is because of the 02 dash doesn't have the selector for the 4wd and I don't really want to source an 02 4wd dash. Plus I wouldn't have to swap the electrical harnesses around in the dash.
Thread
Thread Starter
Forum
Replies
Last Post
OneTireFire
General Ford Ranger Discussion
3
04-15-2010 06:34 AM
kawski650sx
Suspension Tech
0
05-27-2008 10:54 AM