Can someone help me out i need a pic or a hot to on how to remove the center console on the floor in my 2001 reg cab, the one with 2 cup holders i cant figure it out

 

It should be held in with 4 screws, thats how my 04 was. Yours is a little different though.

 

but i cant find the screws it looks like it just sits there and there are no screw holes

 

Is there little inserts in the bottom of the cupholders that could be hiding the screws?

 

nope

 

The inserts if there, have a slot in each one, you can use a screwdriver to unlock them. Mine had a very thin black rubber pad in the bottom of the cupholder hiding them. Make sure its not underneath those pads.

 

alright thankyou i'll look tommorrow caus eit is dark here now

 

If you have an auto trans, this is what the consoles base plate looks like. Remove the cup holder inserts and the rubber under them to get to it.

 

If manual trans, there's two screws that you should be able to see the holes while your driving. pull those screws(phillips), and pop off the shift boot at the base off it's clips. After that, you should be good to go.