Door Panel Swap?
#26
04-27-2009
This thread is a basic how to. I can get some pictures whenever I get a day off. My new job has been working me to death...but the money is good so I can't complain.
#27
05-13-2009
Okay round two pictures
Remove that metal piece sticking out. Then insert the 3 plastic square pieces here. Hold onto those 2 black screws you will be reusing one of them.
You can see where the black screw goes in this picture.
Self Tapping screws here
If you got power window ones and have manual crank windows, its okay you need to make a 1 1/2" hole. Hint...keep drilling small 1/8" holes until you hit the center
Success! You now have more sound deadening material and map pockets.
Remove that metal piece sticking out. Then insert the 3 plastic square pieces here. Hold onto those 2 black screws you will be reusing one of them.
You can see where the black screw goes in this picture.
Self Tapping screws here
If you got power window ones and have manual crank windows, its okay you need to make a 1 1/2" hole. Hint...keep drilling small 1/8" holes until you hit the center
Success! You now have more sound deadening material and map pockets.
Last edited by Hillyard; 05-13-2009 at 06:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NinjaGinga1101
OLD - Interior, Exterior, Electrical, & Misc.
8
01-23-2015 07:59 PM
