Interior Semi-Tech General discussion of interior for the Ford Ranger.

Interior disassembly...

  #1  
Old 11-03-2004
optikal illushun's Avatar
Member
Thread Starter
Join Date: Oct 2004
Location: Coal Region, MTC to be exact...heart of the coal region.
Posts: 2,232
Likes: 0
Received 3 Likes on 3 Posts
anyone know how to get the side A/C vents, defroster vents, panel around the radio and the console on a bucket seat equiped truck with an auto trans...

thanx
 
  #2  
Old 11-03-2004
PickupMan92's Avatar
Member
Join Date: Jun 2004
Location: Orange City, FL
Posts: 1,601
Likes: 0
Received 2 Likes on 2 Posts
radio bezel take a credit card and gently pry off
defrost vents should pop out not sure on anything else.
 
  #3  
Old 11-03-2004
jdugan4859's Avatar
Member
Join Date: Jun 2004
Location: -
Posts: 497
Likes: 0
Received 0 Likes on 0 Posts
Passanger side A/C vent pops out, pry it out with a screw driver. Drivers side is attached to the gauge surrond. Pull the bottom kick panel, the metal sheild, and the surrond. Defroster vets pop out if you pull on them. there are two bolts that point up above the area for the A/C control, remove those, and the radio bezel pulls out. Remove the sliding thing in the cup holders, just pull up, and remove the rubber mats in the bottom. There are two plastic screws, just turn them, and it will come out when you pull up on it.
 
  #4  
Old 11-03-2004
optikal illushun's Avatar
Member
Thread Starter
Join Date: Oct 2004
Location: Coal Region, MTC to be exact...heart of the coal region.
Posts: 2,232
Likes: 0
Received 3 Likes on 3 Posts
thanx =D
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlackRanger04
Interior Semi-Tech
13
01-27-2011 08:50 PM
fabioonachopper
1" & 3" Body Lifts
15
09-21-2009 07:30 PM
99RangerXLT
Drivetrain Tech
7
11-15-2007 08:34 PM
Zero
Interior Semi-Tech
3
10-03-2004 12:32 PM
aftermarket
Interior Semi-Tech
5
08-13-2004 09:35 AM


Thread Tools
Search this Thread
Quick Reply: Interior disassembly...



All times are GMT -6. The time now is 05:30 AM.