Painted my Radio Bezel
#1
#6
Originally Posted by lifted97ranger
looks good!
i would assume that you sprayed water on it before you sprayed the paint correct then let the paint dry, then wipe the water off, and then clear?
i would assume that you sprayed water on it before you sprayed the paint correct then let the paint dry, then wipe the water off, and then clear?
is that how you do it? lol
i may need to go do it, that doesn't show the scratches where you didn't sand it fine enough as well as the red i have does...
thats badass
Last edited by 99ranger4x4; 08-22-2007 at 02:25 PM.
#7
that looks good, i painted mine a dark flat blue two days ago, looks good, and painted the console cupholder below it.
did you have any issue witht he coating that was on it? soon as i hit it with paint it shrivelled up so i spent an hour peeling it off with paint thinner, then painted it.
did you have any issue witht he coating that was on it? soon as i hit it with paint it shrivelled up so i spent an hour peeling it off with paint thinner, then painted it.
#12
The way I did the waterdroplets was I started with a silver base. I then use a spray bottle and spray water on it to form the droplets. I then used my aibrush to add the highlights and shadows. I spray white going in one direction at a low psi and then black on the other side. The water holds the paint and acts like a mask. I then use a heat gun to let the water evaporate and then lay some kandy blue over top that. It a simple technique that I picked up from airbrushing. It does cover up scratches dips, etc to make them less noticable.
I removed the rubber coating that was on the bezel before I painted it. I found nail polish remover worked good to lift it without harming the plastic. It was a pain in the *** though. Lots of sanding.
I removed the rubber coating that was on the bezel before I painted it. I found nail polish remover worked good to lift it without harming the plastic. It was a pain in the *** though. Lots of sanding.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Trade: Explorer Radio Bezel for Ranger Radio Bezel - ON
platinum6316
OLD - Interior, Exterior, Electrical, & Misc.
0
11-26-2011 06:02 AM
jordanvw
Interior Semi-Tech
7
05-24-2011 08:37 AM