Passenget Seat No Longer Rattles
#9
#11
Old Guy User…
iTrader: (12)
Upholstery sort of rolls off inside out and goes back on the same way.
There is a plastic clip on the bottom of the back and the sides of the bottom seat.
Took mine apart to put in Heaters and was surprised to see how simple it was.
I will have to go over the seat bolts and see if something is loose.
#12
That is easy to do yourself, with a little time.
Upholstery sort of rolls off inside out and goes back on the same way.
There is a plastic clip on the bottom of the back and the sides of the bottom seat.
Took mine apart to put in Heaters and was surprised to see how simple it was.
I will have to go over the seat bolts and see if something is loose.
Upholstery sort of rolls off inside out and goes back on the same way.
There is a plastic clip on the bottom of the back and the sides of the bottom seat.
Took mine apart to put in Heaters and was surprised to see how simple it was.
I will have to go over the seat bolts and see if something is loose.
#13
Old Guy User…
iTrader: (12)
The seats I had rolled off enough to put the heaters in place and that was all that I needed so I didn’t go any further.
In turn the Upholstery rolled back on with a little tugging to make sure the fit was right.
If the Upholstery clips on the lower part of the seats then it should be the only thing in the way.
Ford still has some of the Upholstery left for the Ranger Seats, if anyone wanted the OEM looks along with the cost buying from Ford is something to consider.
Thread
Thread Starter
Forum
Replies
Last Post