Loose column shifter, orange rubber
My 07 B2300 column shifter was wiggly so I popped the cover off and saw where the lever goes into the socket, is a loose orange rubber gasket thing. Anytime it shifts, the rubber pops back out and I have glued it back in but I don't think this will last forever. Has anyone encountered this before or where to even find a replacement for it?
|
Google "ford ranger column shifter fix". You'll find a ton of simple how-to videos. Its a very common problem.
|
I have, its pretty well all the same one. The one to tighten the Torx screws, not the rubber bushing.
|
I had the same problem.
There's a guy on YouTube named "ChrisFix" and he has a Mazda B3000/Ford Ranger 3.0, and he performed the fix, and it worked for me, too. The repair is on a Windstar, but it's near identical in the process. Check him out here: Easy fix (y) |
That works if it's the Torx screws but I had no issue with them. I had an issue with my bushing being broken so my shifter flopped around in it's socket without it.
|
Just in case anyone finds this later, here's the separate discussion of the bushing Funkadelicfred is referring to:
https://www.ranger-forums.com/showth...7&goto=newpost |
All times are GMT -6. The time now is 09:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands