Regular cab with full length explorer console
#1
Regular cab with full length explorer console
I got a 06 Regular cab with a 10" kicker bass station
This weekend i want to go to a junk yard to look for a center console and and ohc etc, I'm just wondering if a full length explorer console will fit wiht my sub
Any pics of people having the console in a reg cab with or without subs would be appreciated
For example this is what the sub is like in my truck
This weekend i want to go to a junk yard to look for a center console and and ohc etc, I'm just wondering if a full length explorer console will fit wiht my sub
Any pics of people having the console in a reg cab with or without subs would be appreciated
For example this is what the sub is like in my truck
#3
#5
#7
Bump, still looking for more pics
Also thinking about-
-Painting the whole cab black, seen a few pics and it looks great imo
-Using sound deading material through out the whole cab, so to the people who have done this in a reg cab, how much did you use? and is the difference in noise huge? Like less tire hum etc?
Also thinking about-
-Painting the whole cab black, seen a few pics and it looks great imo
-Using sound deading material through out the whole cab, so to the people who have done this in a reg cab, how much did you use? and is the difference in noise huge? Like less tire hum etc?
#8
Bump, still looking for more pics
Also thinking about-
-Painting the whole cab black, seen a few pics and it looks great imo Do it. It's a good bit of work pulling everything out and putting it all back together, but it's worth it.
-Using sound deading material through out the whole cab, so to the people who have done this in a reg cab, how much did you use? and is the difference in noise huge? Like less tire hum etc? Difference is definitely noticeable. I highly recommend it. I'm not sure how much a reg. cab would use though.
Also thinking about-
-Painting the whole cab black, seen a few pics and it looks great imo Do it. It's a good bit of work pulling everything out and putting it all back together, but it's worth it.
-Using sound deading material through out the whole cab, so to the people who have done this in a reg cab, how much did you use? and is the difference in noise huge? Like less tire hum etc? Difference is definitely noticeable. I highly recommend it. I'm not sure how much a reg. cab would use though.
#10
I used MurderMat. No complaints so far.
#11
Yea that's why I want to take time off work so I'm not rushed. I want to do the entire cab and if i have extra double up on the doors etc
#12
The following users liked this post:
99rangercustom (09-30-2023)
#13
Reg. Cab explorer console
I just did the swap my self, I had a same style sub box as you. You should buy a bit smaller one that dosnt wedge out at the bottom, one with the same size width will work the best for clearance issues. Also the new box I got will actually slide under the little "roll" or watever under the rear window I cut the card board back peice to make the box slide fully back against the rear wall of that makes sense.
Thread
Thread Starter
Forum
Replies
Last Post
ranger4.0
OLD - Interior, Exterior, Electrical, & Misc.
10
02-15-2011 11:25 PM
Tys 4x4 FTW
OLD - Interior, Exterior, Electrical, & Misc.
0
06-27-2009 02:04 AM
rangerkidSHSU
Interior Semi-Tech
3
05-29-2007 11:45 PM