Dash removal to replace heater core
#1
Join Date: Dec 2007
Location: Ocala, Fl & Woodland, WA
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Dash removal to replace heater core
I found this while searching for info. Is this it? Seems to easy...
There are 6 13mm bolts (2 by the fuse box, 2 behind the cluster, 1 behind the theft module and one on the ps door jam) and a small bolt down by the gas pedal. You will also need to remove the steering column, unplug the harness for the ps door, and the antenna wire. Under the hood you have to remove the wires that plug into the firewall under the fusebox and release the tabs from the plugs so the dash will come out. When you pull the dash out part way you will see a plug behind the harness that will need unpluged and you will have to disconnect the blend door.
I think that it...looks like fun.
John
I think that it...looks like fun.
John
#2
Thread
Thread Starter
Forum
Replies
Last Post
WowMike2001
General Technical & Electrical
11
05-02-2010 07:15 PM