So after trying several different LED options for the foglight switch I finally have one I am happy with.

I picked up 2 nano T3 SMD plug in LED from super bright for a grand total of $6 heres the photo story of how they worked out.

The LEDs I used



Installed in the fog switch



Heres the new plug in ones vs the old soldered in LEDs



Side by side illumination shot top switch is a 2500mcd LED seen above. The bottom is the SMD plug in. big difference right!



Both switches on top nodded with an amber LED





I also have some Nano T4s for the headlight switch and 4x4 switch that I will be installing soon.

 

link?

btw, they look great

 

Here ya go, neo 3s

http://www.superbrightleds.com/cgi-b...pecs%2FNEO.htm

 

they are the 3mm ones correct?

 

Looks good

 

ya the fogs are 3mm the head light and 4x4 are 4mm

 

i'll definitely be investing in some of these.

 

Those look good.

Your other led's didn't have nearly enough light output (mcd's)... I use 8,000mcd minimum and some are 20,000mcd.

 

Ya I tried 2000s 6000s and 10000s they all looked like crap and these are far easier and cheaper then any of the components I have bought. Not to mention they take a lot less work, oh and don't mind the crappy soldering that was one of my test switches.

 

are they the high powered ones or the other ones?? 2.29 for high powered or 1.29 for others??

 

These are the high powered ones, for 2.29 but honestly at night they are almost to bright! but they do look real good

 

okay thank you