Removing 60/40 Seat Cushions
 

The driver's side seat in my truck has a big tear in it now from me sliding over it over the last few years. I found a nice replacement at U-Pull-It today, but I don't want the whole seat since my back support is still fine. How do you remove the seat cushion from the frame and back support of the seat. A guide would be nice. Thanks :)

I had a how to on my computer that I typed up about 3 or 4 years ago. I will see if I can find it.

Otherwise you can just pull the little plastic tabs that are around the edges of the seat and the fabric will come off and then the cushion will come off as well.

Here are some pictures.

https://www.ranger-forums.com/attach...ine=1323965604
https://www.ranger-forums.com/attach...ine=1323965604
https://www.ranger-forums.com/attach...ine=1323965604
https://www.ranger-forums.com/attach...ine=1323965604
https://www.ranger-forums.com/attach...ine=1323965604
https://www.ranger-forums.com/attach...ine=1323965604

On the lower portion of the back there is either velcro or just an overlapped portion, roll the covers off; after that the foam will be stuck to the metal so go easy and pull up, maybe use a thin blade or stick to work under the cushion.

The bottom is similar, remember to roll the inside out and it goes back on the same way.

If the seats are the same color think about using the passenger seat from the JY truck as a drivers seat by switching the track mechanisms.

Thanks, guys!

i don't think those pics will help you. if you have a 98-00 like your avatar, your seats are different and a lot more involved. here is an exploded diagram of 98-03 seats.

https://www.ranger-forums.com/attach...ine=1323990860

When I took my covers off I did both sides and put them in the washer and then the dryer. Cleaned them up great and I stiched up a tear in the side.
https://www.ranger-forums.com/pictur...ictureid=11989
https://www.ranger-forums.com/pictur...ictureid=11993

Thanks for you guys' input. :) I just called U-Pull-It, and they said that they'll charge me $20 for the whole seat. If that's the case, I'll just put the whole thing in there and not worry about pulling the seat cushion itself.

What about making a set of bucket seats by using the JY passenger seat ?

I don't want bucket seats in that truck. I like the 60/40. Thanks, though. :) I got the seat (frame included). The total was $22.81. I for sure thought that it would cost $60 or $70. They also brought in a Sport Trac. I'll probably go back tomorrow and see what I can get out of that.