Removing Bezel w/ Aftermarkey HU
I was going to paint over my AC overlay with some blue and red paint to go with my new HU. My question is with the filler plate connected to the HU how do I pull out the bezel? Will the HU and filler plate remain in place, or will I have to pull those as well?
Here is what I am working with: http://csunswimming.com/images/IMG_0652.JPG |
Just remove the two 7-8mm screws on the bezel and remove the whole assembly as one. It will be easier.
|
so the HU will come out attached to the bezel?
|
there is a special clip that attaches the radio to the bezel, i'm sure there is some way to rig it up but they need to be unclipped to separate the radio and bezel.
|
alright so all i have to do is undo the two screws and pull and there should be no worries?
|
Originally Posted by RangerJustin
so the HU will come out attached to the bezel?
|
alright sweetness...thanks for the help! hopefully i will have some time tonight to give it a try...
|
All times are GMT -6. The time now is 08:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands