Seat conversion
You can use most any seat as long as its not too wide so you can't close the door, lol
1995 Ranger seats are bolted on to the frame/tracks that bolt to the floor
You can bolt another seat to the frame, just use flat bar, if/when holes don't line up, like this on a non-Ranger seat: https://www.therangerstation.com/wp-...-2_seats-1.jpg
The frame/tracks has the sliding part, forward and back, so that stays the same
If you have a super cab 2 door you probably want seats that have a back that can fold forward so you can access the rear area easier
And in a regular cab, thick or high backs may not slide back as far, so heads up
And finally, height, if seat bottom is not as tall then you may want to add spacers to sit up higher
For electric seats you need to swap out the frame as well
1995 Ranger seats are bolted on to the frame/tracks that bolt to the floor
You can bolt another seat to the frame, just use flat bar, if/when holes don't line up, like this on a non-Ranger seat: https://www.therangerstation.com/wp-...-2_seats-1.jpg
The frame/tracks has the sliding part, forward and back, so that stays the same
If you have a super cab 2 door you probably want seats that have a back that can fold forward so you can access the rear area easier
And in a regular cab, thick or high backs may not slide back as far, so heads up
And finally, height, if seat bottom is not as tall then you may want to add spacers to sit up higher
For electric seats you need to swap out the frame as well
You can use most any seat as long as its not too wide so you can't close the door, lol
1995 Ranger seats are bolted on to the frame/tracks that bolt to the floor
You can bolt another seat to the frame, just use flat bar, if/when holes don't line up, like this on a non-Ranger seat: https://www.therangerstation.com/wp-...-2_seats-1.jpg
The frame/tracks has the sliding part, forward and back, so that stays the same
If you have a super cab 2 door you probably want seats that have a back that can fold forward so you can access the rear area easier
And in a regular cab, thick or high backs may not slide back as far, so heads up
And finally, height, if seat bottom is not as tall then you may want to add spacers to sit up higher
For electric seats you need to swap out the frame as well
1995 Ranger seats are bolted on to the frame/tracks that bolt to the floor
You can bolt another seat to the frame, just use flat bar, if/when holes don't line up, like this on a non-Ranger seat: https://www.therangerstation.com/wp-...-2_seats-1.jpg
The frame/tracks has the sliding part, forward and back, so that stays the same
If you have a super cab 2 door you probably want seats that have a back that can fold forward so you can access the rear area easier
And in a regular cab, thick or high backs may not slide back as far, so heads up
And finally, height, if seat bottom is not as tall then you may want to add spacers to sit up higher
For electric seats you need to swap out the frame as well
https://www.therangerstation.com/tec...ger-seat-swap/
Thread
Thread Starter
Forum
Replies
Last Post
stbj_7@yahoo.com
General Ford Ranger Discussion
4
Oct 18, 2021 06:58 PM
ReeseRoyster
General Ford Ranger Discussion
2
May 21, 2016 10:07 AM



