Taking rear jumper seats out?
 

I was wondering if you I can take out the rear jumper seats out of my truck and maybe install a rear panel from reg. cab so i won't have that opening? Has this been done?

Ive been trying to take my rear ones out. There's a BIG Torx head bolt in there though, bigger than a t40, than I can't get out. Other than that, there are 4 bolts that are i think 13mm. Hopefully someone can help us both out.

i havent thought about that but that sounds like a good idea...i just hacked the hell out of mine and put a box in front of it...as for the bolts just crank on them...they will come out.

I used a T45 Torx to get them out. I don't see why you couldn't use something like that to cover it up. There are 2 torx per seat.

took mine out..take all the plastic out..

13MM and a torx bolt take the seat belt thingy off to get that lower one off...

anybolt you see take off

:stupid:

its not ha rs to take the seats out at all.

I took the jump seats out of my 4 door, it looks fine with them just takin out and nothing put back in

it takes all of 5 min to take out...

there will be some carpet missing from where the jump seats were