Small Cab, Want Bucket Seats
#1
Small Cab, Want Bucket Seats
I'm looking to put bucket seats in my 97 ranger, but as you may know cab space is very limited in a model with no back seats. The factory seats don't even recline very far. I was wondering what my options are in the way of bucket seats when I don't have much room to work with.
thanks
thanks
#2
you can modify you stock seats so that they are bucket. the extra part on the driver's seat can be cut off using a cutting wheel or a cutting torch (overkill) then cover it up by sewing in some new fabric. this is what i did, but I also cut off the headrests for a low profile bucket seat.
there are several other options like explorer seats, mustang seats (bolt-in), or you can use almost any bucket seat and modify the track to fit in your truck.
there are several other options like explorer seats, mustang seats (bolt-in), or you can use almost any bucket seat and modify the track to fit in your truck.
#7
#10
you could do a true bench seat, but again you probably have to fabricate your own tracks....maybe a rear bench seat from an explorer or mustang. I haven't heard of this being done before so I don't know how easy or difficult it would be. As far as I know, there aren't any direct replacement bench seats for the Ranger.
I think the bench is a good idea, I am hoping to do this in my 90 Ram, but this should be pretty easy cuz some years came with benches or I could pull one from a Ramcharger.
I think the bench is a good idea, I am hoping to do this in my 90 Ram, but this should be pretty easy cuz some years came with benches or I could pull one from a Ramcharger.
#11
#12
go to a junkyard and get some seats, just hunt around at a couple. You wont be able to fit explorer seats in your regular cab without changing the seat tracks. I changed my seats with another ranger, its easy and i asked dumb questions only cause im lazy.
But basically, if you want less work with great quality, get some seats out of a regular cab ranger...otherwise use your imagination cause if you have the resources then you can make anything.
But basically, if you want less work with great quality, get some seats out of a regular cab ranger...otherwise use your imagination cause if you have the resources then you can make anything.
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: Seats, seats, SEATS! NC
drppdyllwrngr
OLD - Interior, Exterior, Electrical, & Misc.
30
03-16-2010 07:38 PM
Andrew_2006
OLD - Interior, Exterior, Electrical, & Misc.
11
05-22-2009 01:01 PM
cory07ranger4x4
Interior Semi-Tech
14
10-07-2008 11:39 AM
james13f
Interior Semi-Tech
13
05-12-2005 03:45 PM