Interior Semi-Tech General discussion of interior for the Ford Ranger.

fixing cb, doesnt let talk

Thread Tools
 
Search this Thread
 
  #1  
Old 12-13-2006
Otis_Ranger's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Otis, MA
Posts: 244
Likes: 0
Received 1 Like on 1 Post
fixing cb, doesnt let talk

I found on craig's list 2 cb radios for $25...the catch is that neither of them can transmit over the radio (as in you can't talk to other people), but can recieve fine. Sound like something easy to fix, or too much of a hassle/waste of time. Been looking to get a cb for the truck and didn't think $25 was a bad deal...but I would like the luxiary of being able to f@*k with the truckers as I'm goin down the Mass pike to/from school. Opinions?
~J
 
  #2  
Old 12-14-2006
Join Date: Aug 2006
Location: Gloucester Hts, NJ
Posts: 436
Likes: 0
Received 0 Likes on 0 Posts
You can get a nice new radio for not much more than that. The Uniden Pro 510XL or 520XL come to mind. Saying that, I can't agree with your idea of messing with the truckers. The radio waves are too clogged already with people wasting the air-waves doing what you plan to do. These guys and gals have a job to do and the CB is an important tool for there job. They don't need a bunch of people taunting them or clogging up the air-waves.
 
  #3  
Old 12-14-2006
n3elz's Avatar
RF Veteran
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
It's a crap-shoot. There are basically 3 main reasons you can't talk to people (there are more, but these are vast majority of them):

1. Bad microphone element. In this case the rig will go into "transmit" mode, but no one can hear you, though you are putting out a radio signal.

2. Bad cable/connector/switch. Here, the signal from the mic when you push the talk button doesn't get to the radio to make it go into transmit mode. When you press the mike, the speaker may shutoff, but the transmit light doesn't light.

3. Blown "finals". The worst scenario. The RF power section in the rig is gone and transistor(s) and/or other components need to be replaced to make it work again. May look like it's transmitting, but there is little to no signal coming out.

I agree it's stupid to mess with trucker. Immature and nothing to be gained by it. It just makes the radio useless for others who need it -- did you get on this forum just to "mess" with us? Why would you abuse a communications medium like that? Doing so makes you an @ssh0le if you do.
 
  #4  
Old 12-14-2006
RockysFord's Avatar
Member
Join Date: May 2005
Location: Columbus Ohio
Posts: 2,782
Likes: 0
Received 0 Likes on 0 Posts
Like others said, its not worth it.....Your better off getting a good radio to begin with...

As for messing with truckers, its not smart, Havent you ever seen the movie JOY RIDE?

Lol....I mess with truckers everyonce in awhile, mainly because i work for a trucking company and i know how they talk, normally i only mess with my own trucking company.....

Rocky
 
  #5  
Old 12-14-2006
Otis_Ranger's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Otis, MA
Posts: 244
Likes: 0
Received 1 Like on 1 Post
alright alright i get the point....didnt mean to get on everyone's bad side by the truckers comment...but thanks for the advice either way as I figured I'd be passing up on those radios anyways. Where can you find those Uniden radios for around the same price you say? I've found some on ebay but they are different models and usually going for around $50 w/o antenna
 
  #6  
Old 12-14-2006
Trigger01's Avatar
RF Veteran
iTrader: (2)
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Likes: 0
Received 1 Like on 1 Post
You can get a midland CB off of eBay of $25ish, that's whereI got mine. Midland 1001z.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Grumpy
Wheels & Tires Semi-Tech
15
07-23-2012 12:41 AM
jtfoxman
General Ford Ranger Discussion
13
01-16-2011 03:56 PM
shooterdude199
Suspension Tech
15
01-01-2011 04:32 PM
Fx4wannabe01
General Ford Ranger Discussion
26
06-25-2008 07:29 PM



Quick Reply: fixing cb, doesnt let talk



All times are GMT -6. The time now is 03:48 PM.