I have a 2003 level II with a passenger side window that does not seem to seal when closed all the way. When I lower the window it lowers without a problem, but when I raise it the front of the window takes a slight dive and the rear consequently shuts first. I am assuming this is the reason for the wind and sound of it still being opened a crack while driving. I had a similar problem on my 04 xlt. Both have power windows. I was wondering if anyone has had a similar problem and if they were able to fix it. Are there window clips that can be replaced or does something need tightening? Thanks! -tim

 

regulator is prolly shot...and they are fun to replace as the window/regulator are riveted in

 

its a pain to replace.... i did it this summer...

i recommend to get the regulator and the motor in one piece

 

did you have the same problem with the window now closing evenly from the front to back of it? and how much did it run you if you don't mind me asking?