Some info on a 2004
#1
Some info on a 2004
I just got a 2004 ford ranger xlt 4x4 with a 4.0l and 5 speed. I am new to r-f and the ranger and 4x4 world and i was wondering what the truck had as far as front and rear axels, do they have factory lockers, what size tires will fit on the stock height( no lift or t-bar crank), and any other important thing i would need to know about these trucks. thanks for the help and any info that is provided.
#3
Look on your inside door tag. You can take a picture of it if you want and we will tell you what it all means, thats the easiest way about figuring what your truck has. You have a d35 front and a 8.8 28 spline rear, probably with 4.10s but it could be 3.73s. You can easily run 32x11.5x15 or 33x10.5x15 and the metric equavilants which I think are 265/75r15
#4
#5
Look on your inside door tag. You can take a picture of it if you want and we will tell you what it all means, thats the easiest way about figuring what your truck has. You have a d35 front and a 8.8 rear, probably with 4.10s but it could be 3.73s. You can easily run 32x11.5x15 or 33x10.5x15 and the metric equavilants which I think are 265/75r15 and 255r
#6
#7
That would be hard to do since vacumn hubs stopped in 2000.5, you can run 32s without trimming and he probably has 4.10s, they were more common 04+
#9
Thread
Thread Starter
Forum
Replies
Last Post
LucusWahl
Wheels & Tires Semi-Tech
2
03-11-2010 05:25 PM
Sonic04Edge
General Ford Ranger Discussion
19
10-01-2006 08:28 PM
wanted
General Ford Ranger Discussion
15
10-16-2005 08:27 AM
VulcanMotor~PowerHouse
General Ford Ranger Discussion
23
09-30-2005 10:40 AM