Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   New Ideas (https://www.ranger-forums.com/new-ideas-17/)
-   -   I just bought my first Ranger and I want to do a few things to it. (https://www.ranger-forums.com/new-ideas-17/i-just-bought-my-first-ranger-i-want-do-few-things-115579/)

mtlove91 Nov 24, 2010 12:36 AM

I just bought my first Ranger and I want to do a few things to it.
 
1 Attachment(s)
Hey Guys,

I just bought my first Ranger about a month ago. Unfortunately i bought a truck that needed a lot of work (but i didn't know it at the time). Its at my friends ford dealership getting a new engine and tranny (I got a really good deal thankfully).
So when I get the truck back its going to be good as new. So take a look and tell your opinions.

Heres my Ranger:
Its a Black 2002 Ranger Edge 4.0L V6 4X2

Here is my truck, and below it is a list of what I want to do.

Attachment 95284

I wish to complete the list in this order:

1. Window Tint (15%)
2. '07 Emblems
3. HID Lights
-Head Lights (6,000k)
-Fog Lights (3,500k)
4. K&N 57 Series FIPK > Performance Intake Kit
5. Exhause
-Im not quite sure what I want to do with the exhaust. I don't want something
that sounds to loud, I just want something that sounds deep and smooth. Just a nice sounding exhaust.

So there's my list guys. Please feel free to tell me what you think. I open for new Ideas, brands, and constructive criticism.

04RangerDave Nov 24, 2010 06:34 AM

Those intakes are a waste, just do the air-box mod its a lot better IMO and put in a K&N drop in. for exhast i just did catback 2.5 dual straight pipes exiting behind the rear tires but its very loud

trextegra Nov 24, 2010 09:38 AM


Originally Posted by 04RangerDave (Post 1768986)
Those intakes are a waste, just do the air-box mod its a lot better IMO and put in a K&N drop in. for exhast i just did catback 2.5 dual straight pipes exiting behind the rear tires but its very loud

fantastic advise on the intake i didnt do a k and n kit i just got a filter and a map sensor adapter call it ghetto but whatever its the same exact thing but anyways gas mileage **** the bed due to engine heat being sucked in from the intake switched the box back in and did the mod better gas milage sounds nice

djfllmn Nov 24, 2010 10:46 AM

why does it need an engine and trans?

Masteratarms93 Nov 24, 2010 11:05 AM

As 06+ Signal Corners to the list and black out your headlights and corners. They will really look awesome on your black truck.

06+ tails are a nice touch also and if you have want you could so 06+ mirrors to.

mtlove91 Nov 24, 2010 11:05 AM

I think I will just do the air box mod and the stock replacement K&N. Well I took a major risk by buying it on craigslist, and now I'm paying for it. I was playing around in the mud a little bit when all of a sudden I had no reverse, no 3rd gear, and no overdrive. So I took it to my neighbors shop and it was just bad news from there. All the cylinders were working about about 90% percent and there was no way it would have ever passed smog. So I got an engine/tranny combo for $2,300 installed. both under 45,000 miles.

Keep the imputs coming. I'm not sure what brand hids I should get, or what kind of exhaust. Im thinking Gibson?

mtlove91 Nov 24, 2010 11:39 AM


Originally Posted by Masteratarms93 (Post 1769099)
As 06+ Signal Corners to the list and black out your headlights and corners. They will really look awesome on your black truck.

06+ tails are a nice touch also and if you have want you could so 06+ mirrors to.

Thanks for your input!
I've always wondered about blacking out the headlights. Wouldn't that make the headlights way more dim?

Now do the 06+ signal corners and tail lights need fabwork? Do you know of a how to?

djfllmn Nov 24, 2010 11:48 AM


Originally Posted by mtlove91 (Post 1769133)
Thanks for your input!

Now do the 06+ signal corners and tail lights need fabwork? Do you know of a how to?

direct swap...im runnin the tails on my 03

rangerboy101 Nov 24, 2010 12:33 PM

The 06+ corners and tail lights fit no problem. When he said "black out your headlights" he means opening up the headlight and painting everything but the reflective part where your bulb shines. It doesn't make your headlights dim at all. It makes them look like this:
https://www.ranger-forums.com/f69/ds...orners-107892/

ES894x4 Nov 24, 2010 12:39 PM


Originally Posted by mtlove91 (Post 1769100)
there was no way it would have ever passed smog.

you bought it with out a clean smog? or had it passed in the last 90 days? you live in cali smog test had to have been in your mind when you bought it

for exhaust pick up a muffler you like(people are just gonna start the chokemaster, magnaflow mess here) id say cherry bomb vortex, single in single out 2.5" and just go to a muffler shop and have them weld you up a cat back, just make sure they use mandrel bent tube.

i also like the stock headlights and corners esp on an edge, looks way cleaner imo then the 06 corners and black housing lights

mtlove91 Nov 24, 2010 12:52 PM


Originally Posted by ES894x4 (Post 1769149)
you bought it with out a clean smog? or had it passed in the last 90 days? you live in cali smog test had to have been in your mind when you bought it

I bought it with a clean smog. Unfortunately he played me like a fiddle, and i made a hasty decision buying the truck. but im in to much money now to give up.

Ford04Ranger4.0 Nov 24, 2010 01:15 PM

DDM hids
Magnaflow muffler
Headlight mod
New rims
Some nightshade
Interior audio

Truck would be complete lol

The SuperDookie Ranger Nov 24, 2010 01:41 PM


Originally Posted by 04RangerDave (Post 1768986)
Those intakes are a waste, just do the air-box mod its a lot better IMO and put in a K&N drop in. for exhast i just did catback 2.5 dual straight pipes exiting behind the rear tires but its very loud

Hopefully your joking, How is it a waste? I have fipk 57 with throttle body spacer and 33's and some guy in 07 ranger 4.0 stock tried to race me last night and I still pulled on him, that's with 33's and 4.10's and I still struggle. My advice would be to get a CAI, saves a bit of fuel and add's an extra kick, you will notice the difference guaranteed. But def get an exhaust, cause my air flow is ****ty with stock exhaust.

and no, I'm not here to start an argument, I just think that's dumb to say their a waste. I know guys with air box mod and it's not even a comparison to CAI.

Masteratarms93 Nov 24, 2010 01:59 PM


Originally Posted by mtlove91 (Post 1769133)
Thanks for your input!
I've always wondered about blacking out the headlights. Wouldn't that make the headlights way more dim?

Now do the 06+ signal corners and tail lights need fabwork? Do you know of a how to?

Yeah I don't mean black covers on your headlights. I mean crack them open and paint the silver black. As for the 06 tails they bolt right up. Or you could keep your 01-05 stock ones and tint the red to black. I like both setups equally.

If you look around in threads and in the pic albums you will see TONS of 01-05 Rangers with that setup.

ES894x4 Nov 24, 2010 02:10 PM


Originally Posted by The SuperDookie Ranger (Post 1769179)
Hopefully your joking, How is it a waste? I have fipk 57 with throttle body spacer

hopefully you are as well lolz

is a cai a waste; no, will it increase throttle response with proper design; yes, is a tube and a filter worth $250; never, thats why k&n is a waste.

sw33t str33t kill y0! tHrOtTlE BoDy Sp4c3Rs FTMFW!!!!!

rangerboy101 Nov 24, 2010 03:11 PM


Originally Posted by Masteratarms93 (Post 1769188)
Yeah I don't mean black covers on your headlights. I mean crack them open and paint the silver black. As for the 06 tails they bolt right up. Or you could keep your 01-05 stock ones and tint the red to black. I like both setups equally.

If you look around in threads and in the pic albums you will see TONS of 01-05 Rangers with that setup.

Just because.... tinted 01-05 tails.

Close-up:
http://farm2.static.flickr.com/1255/...e1165e27_b.jpg

From a distance:
http://farm2.static.flickr.com/1103/...1e7918cc_b.jpg

Ok I'm done whoring. OP, if you have any questions about any of this PM me.

Masteratarms93 Nov 24, 2010 03:49 PM

nice.

I like the 01-05s tinted. I don't like 06+s tinted. They looked better stock IMO

nicky919 Nov 24, 2010 05:21 PM

Just out of curiosity, what do you consider: Big O All Terains?

mtlove91 Nov 24, 2010 05:25 PM


Originally Posted by nicky919 (Post 1769261)
Just out of curiosity, what do you consider: Big O All Terains?

Big O "big foot" all terains. That the brand. Big O makes them...

Masteratarms93 Nov 24, 2010 05:58 PM


Originally Posted by nicky919 (Post 1769261)
Just out of curiosity, what do you consider: Big O All Terains?

Haha i was just thinking the same thing/ I was like "those don't look very big"


Originally Posted by mtlove91 (Post 1769263)
Big O "big foot" all terains. That the brand. Big O makes them...

Ahhhhhhhh

04RangerDave Nov 24, 2010 07:48 PM


Originally Posted by The SuperDookie Ranger (Post 1769179)
Hopefully your joking, How is it a waste? I have fipk 57 with throttle body spacer and 33's and some guy in 07 ranger 4.0 stock tried to race me last night and I still pulled on him, that's with 33's and 4.10's and I still struggle. My advice would be to get a CAI, saves a bit of fuel and add's an extra kick, you will notice the difference guaranteed. But def get an exhaust, cause my air flow is ****ty with stock exhaust.

and no, I'm not here to start an argument, I just think that's dumb to say their a waste. I know guys with air box mod and it's not even a comparison to CAI.

Why spend that much on a piece of pipe and a filter. All your paying for is the name. I've never liked them they make to much resonance/ turbulence and can mess with MAF and IAT. All they do is allow more air causing the engine to run lean thus better gas mileage.

YouTube - Cold Air Intake - Waste of money!

mtlove91 Nov 24, 2010 08:11 PM


Originally Posted by 04RangerDave (Post 1769331)
Why spend that much on a piece of pipe and a filter. All your paying for is the name. I've never liked them they make to much resonance/ turbulence and can mess with MAF and IAT. All they do is allow more air causing the engine to run lean thus better gas mileage.

YouTube - Cold Air Intake - Waste of money!

Does a K&N stock replacement filter in a moded air box let in the same amount of air?

The SuperDookie Ranger Nov 27, 2010 12:03 PM

I'v ran them in plenty of vehicles and never had a single problem with MAF. Your right about price being to high. But it's still not a waste, like you said it will allow for better fuel mileage........Second it's actually a significant notice in hp, especially if you have bigger tires. They are proven, not saying they are badass or anything, but that's why K&N has such a good name and why prices are high. I'd rather spend more money for something like that and have a noticable difference, then have air box mod with drop in and not notice anything.

That video BTW was so f-ing ignorant.

darangerdanger Nov 28, 2010 11:02 AM

back to the main topic-

i think a billet grille and billet lower grille would look SICK with that black truck!!

and a smaller mod(if you don't listen to the radio a ton lol) a shorty antenna would clean the look even more. plus they're cheap!
https://www.ranger-forums.com/member...91-antenna.jpg

oh and get some fx4 seats :) lol
https://www.ranger-forums.com/member...0-woohoooo.jpg

as for exhaust I personally like magnaflow. quiet at idle but roars to life on the throttle. i'm running a 14" muffler and had a shop cut/bend me a cat back 2 1/2" dual exit.
https://www.ranger-forums.com/member...ew-exhaust.jpg

The SuperDookie Ranger Nov 28, 2010 01:00 PM

Can you order new fx4 colored seats from ford or anywhere? or do you have to find them?


All times are GMT -6. The time now is 10:48 PM.


© 2026 MH Sub I, LLC dba Internet Brands