seat belt sensor
 

so i got new racin seats and harnesss so wht do i do about the sensor in the stock belts?

Good question, I still have stock seats but want to disable it. I thought about getting a cut one from a yard to leave buckeled in, but for now I leave it buckeled all the time

what kind of racing seats? got pics, and what kind of harness?

you gonna build a bar for the harness? cuz its worthless otherwise

Read the owners manual, You can turn teh dinger off. You need to pull the belts full length 3 times with the key in teh acc position. There will be a ' chime ', then you need to pull it 3 more times and it chimes twice ( or something like that ) . My seatbelt alarm has been off for almost 2 years now.

Not true. I ROLLED with mine on. Worked flawless.

im not sure about a bar, this is going to be a all day job for me im sure...im doing all this as a 1st timer with n directions. D i was readin my manual and it says to disconect the negative wire to the battery so it dosnt set off the air bag, didnt come across waht you said to do but ill give it a shot. Everytime I ask 4 help uve never steared me wrong....

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT

those are the ones I bought and there are pics there.

D. are yours bolted to the floor? I'm guessing so

but some people bolt the harness to the back of the seat because of the length of the straps, thats when they become useless.

one other thing D? when you turn the chime off, does that over ride the air bag sensors then? I thought the main purpose of the electronics in the belts were to know when to deploy the bags?

I know on an 2004 you need to set parking brake,make sure your in park or neutrar ignition off doors closed drivers belt unbuckled lights off. now turn ignition to run or on dont start the truck wait untill the belt light goes off (approx. 1-2 minuts) then buckle and unbuckle the belt 3 times ending with the buckle unbuckled turn lights on and off then buckle and unbuckle three more times.(this needs to be completed within 60 seconds) the seat belt light should come on for 3 seconds. then buckle and unbuckle within 7 seconds. the confirmation is that the light will flash 4 times per second for 3 seconds. hope this helps. my light comes on still but gose out after a little bit.

nice, I was wondering how to do so as I don't have the owner manual...!

Yea I was wondering the exact thing. i just bought harness' and some racing seats. i couldnt find anything like a mod to put in the seat sensor plug. i just wondered where you guys found these proceedures to disarm the system( c i couldnt find it in the manual anywhere.

If anybody is willing to sell me the pre-tensioners then let me know. I need a set badly!!!

ok i found and did the seatbelt indicator thing and it did work. But now wut am i susposed to do with the seat sensors. is it possibible to take it out of the seat and just have it hooked up under the carpet?