Torsion bar keys (MI)
 

i dont need to hear how bad keys are for everything blah blah and that they will ruin everything...looking for a set for cheap to experiment with...not the stock or "pre key" ones but some of the lift ones that everyone hates

i dont see why every one hates them. havent noticed any change in my trucks front end at all.. they are a pain in the A** to put in though..

well i have already had mine off when i put the bars in, itll take me 20 mins tops to install them...im gonna max them today how they are and see what i get out of them

I wanna see what you're up to Justin... lol

your going to max the stock keys ? or max the aftermarket lift keys ?

stock

There is a set on their way to your house. Expect them in 4-10. Seriously.

tyler...you are the man...i cant wait to get them and be the guinea pig...thank you budday!

Jesse (Cooke15) is running them and hasn't had any problems, is yours a DD

ive had mine sence 07-08ish and no problems! they are a b*tch to put in. the flange where you clamp on the puller bent on my truck so i had to use a chain over that cross member. Hope you dont have any problems i wanna see how high you can go sence our trucks are basically gonna be the same set up.

just make sure you get an alignment... and i don't think that's a point anyone would argue...

How much higher are they supposed to be compared to maxed 06 Keys? I know I have an 08 but i gotta da pwe keys

Justin, Let me know when your gonna put em' in. I'm interested to see this.

i definately will align my truck when im done...ill let you know Justin

im also interested. im just not happy with the lift with my stock torsion bars. and no way im dishin out over a G for a suspension lift.

i would just have no idea how to install them.

It's not that hard. More time consuming than anything. Search on here. I think there may be a how-to.

I also wanna see that go down. Count me in.

time consuming... **** we did t-bar swap on my truck in 28 min flat for both bars.. i dont see it being much different

Really comes down to having the right tools, and disconnecting the shocks helps too. I have mine maxed out already it's fine, but I do need longer shocks.

as zach said THIS IS NO BIG DEAL. if it takes more than an hour to install both, somethings wrong. you need a 10mm socket, 13mm socket, 2 jaw puller and an air hammer or normal hammer. you guys are over thinking it