oh it flys lol.

 

get us a vidio hahah

 

Ill get one for you guys after i put my new seat in and charge my camera!!!

 

how many high school girls are still that tight on prom night? ..right, wrong thread for that discussion lol


sounds sick man! hurry up in the videos! and by 'today' do you mean you swapped the engine in one day?

 

well it really depends on what kinda high school girl she was lol...... But yeah i was joking about the engine thing if you read the sentence below the video it says i was just running open manifolds.

 

Fudge!!!! Dammit!!! SOOO apperently my floor plan is that of a 93 ranger it makes no sense because mine is a 92. So i sent the bracket back and corbeau is sending me the right one. Only problem is now i have a 220 dollar chair in my room not doing anything for a week!!!!

 

So i got my front bumper on today and it really brings up the look of the front of my truck. But now my slave cylinder is deciding to go out i believe. It keeps sucking brake fluid from the clutch reservoir and there is no external leak so when i pull the inspection cover off tomorrow i believe im gonna get a load of brake fluid in my face. Dammit. the one thing i decided not to replace while i was in there. Pics up tomorrow of the front bumper and new seat since the bracket is coming in tomorrow.

 

Putting on the bumper required a little custom fab......

 

Updated pics!!!!



And the transmission out for a second time...... damn slave cylinder....


Decided to clean it up since it was out looks alot nicer now.

 

So ill be posting some videos today of my antics around my neighborhood. Hopefully i can figure out a way to get the video on my comp since i don't have my video editing software anymore....

 

So... I went through hell and back today to get my rear fenders. But i did end up getting them then getting stuck in traffic for four hours on the 215 freeway which was closed down. Then it snowed all over my truck. So here are some pics of the fenders and my truck after the snow. Im gonna start making measurements and mapping things out tomorrow if weather permits to start the "hanging" of the fenders.
The fenders:

Now the snow.





Me filling up the gas tank.

Some more snow

 

Took some measurements today and am getting ready to start the chopping off of my old fenders. And worked some more today, i have been working so much my normal hours are becoming overtime lol. But yeah next pay check = big = more parts like extended beams.

 

Well i decided to go ahead and get my fenders ready for saturday which is when im hanging them. But anyways i went over to my buddies house and he showed me how to work with fiberglass because my fenders i got had some cracks in them but anywho we had a blast doing it because i had never worked with fiberglass before. Here are some of the pics don't mind the splatter that corner we did is damn tough now.

 

And so it begins! Today we hang one fender and tomorrow we hang the other! Ill post pics later tonight!

 

Looks good bro. Fiberglass is quite different to work with. Good luck hanging all the panels, I look forward to the pics. I may have missed this earlier in the thread, but are the rear fiberglass panels flared like the front?

 

Yah the rear fiberglass is flared 5.5 inches and have a rise of 4 inches but its raining and i won't be able to get out there and do it so maybe when my buddy Dale has some time we will be able to get out there. I might just end up doing it on wednesday or monday im not to sure yet. We will see but hey no-one ever said it goes the way you want it too.

 

Getting better at working with fiberglass this looked like it turned out really good.





Damn that looks professional!


Edit: That rear part was cracked to hell before i fixed it just to let you know. So i think it came out pretty decent.

 

So today was the day. We hung one fender. It was hell im not really looking forward to doing the next one because im really hurting right now but oh well i have started and commited to it i have to finish it. I know its gonna look *****en but damn i really don't like it when it doesn't fit right, we had to do alot of grinding and removal of more fender. But in the end we came up with this! It turned out pretty decent.
Beginning before removal.


Then the cutting:




Then we had to notch the bed to fit the fiberglass lip:



All this had to go:


Initial fitting to get a look for what it was gonna look like:

Body lines don't quite match but i don't care.


Finally some coverage for my tire!:




Final shot fo one side before i took off to work.



So yeah im rocking one rear fender flare till next weekend but i personally don't care all i know is damn that was a hellauva experience.

 

Damn thats alot of work, trucks looking good.

 

Nice! Looks good on there

 

Oh it was man it was and when my mom walked out on me cutting into the fender like that she **** bricks! It was funny.

 

Very nice J!

Good to see my old tires are still holding up.

 

Nice work J.

 

That looks like a serious pain!! Turned out great though.

 

Looks like a lot of work. But worth it in the end.