Project backhalf/3link
#276
I didnt think I would ever go bigger than 37s or ever swap in a v8. plus i dont wheel like a moron on the skinny pedal.
#279
#280
Member
iTrader: (1)
Join Date: Mar 2005
Location: Acworth, GA
Posts: 2,099
Likes: 0
Received 0 Likes
on
0 Posts
My only concern for it being mounted horizontally was the joint itself not having enough mis-alignment for the travel you want to acheive.
I'm not too big a fan of those joints because of the smaller bolt required, but there may be newer joints that use larger bolts. What size bolt do these use zach?
#281
9/16" you can get them in 5/8" or 3/4". the 3/4" bolt size the joint goes to 3" instead of 2.63.
I like them because they are inexpensive to rebuild and they are greaseable which makes them last longer and allow for some noise reduction with the plastic. A ton of guys run them on pirate and I really have not had an issue with them. Heims are nice but the good ones are not cheap at all. (JK etc)
I like them because they are inexpensive to rebuild and they are greaseable which makes them last longer and allow for some noise reduction with the plastic. A ton of guys run them on pirate and I really have not had an issue with them. Heims are nice but the good ones are not cheap at all. (JK etc)
#286
#291
i'm not always on that pedal and it wont take much to break a d44 with 42s
please not iroks, the sidewalls make them look like balloons
#292
#296
yeah i know. i think id like to run a hi9 with D60 outers. I really like that ruff stuff 9" they just came out with. I just need to find a good used hi 9. Then run the 35 spline shafts. :) but if you have any idea what i am talking about you know how much that would cost. LOL
#297
im pretty stuck on the Kores since they are members of the pirate community and he seems like a pretty cool guy and it comes with a good price. Probably just get some 17x9 cragers and weld that kore beadlock to it.
#300
yeah i know. i think id like to run a hi9 with D60 outers. I really like that ruff stuff 9" they just came out with. I just need to find a good used hi 9. Then run the 35 spline shafts. :) but if you have any idea what i am talking about you know how much that would cost. LOL
well they look huge atleast..
and yea, i know what your talking about.. mega bucks..