93-97 Ranger Parts - PA
#1
Join Date: Oct 2010
Location: Morrisdale, PA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
93-97 Ranger Parts - PA
Anyone out there looking for some parts for a 93-97 Ranger?
i have a front and rear bumper in spotless condition, other than a chip taken out of the lower valance on the Front bumper, and a few nicks out of the plastic in the rear bumper, Asking maybe 200 for the pair?
( don't mind the action shot! Haha )
Passenger side door, 50$ Without the guts ( window included
the stock 60/40 spit bench seats ( Driver side is cut down to a "40" so you can fit a full length center console in there. ) 75$ For the pair
(Before they were cut down )
Stock Headlights and corner lights, 70$ for both
a 7ft bed with a hole cut for a fuel cell. ( needs the corners by the bumper patched.. i may patch them and do the body work.. ) This is negotiable, definitely...
Will have some stock interior pieces F/S, Lemme know what you need and i'll let ya know if i have it ( if not, i can probably find it at the yard. ) There's a pic of the interior under the seats.
and a Pioneer 10" Sub, BRAND NEW in the box still.. 60$ Rated for i believe 500 RMS and 1000 Max Dont have a pic of this one, Can get one if you're interested though!
And the factory alum. Rims off of a 93-97 Ranger.( these are the "teardrop" Shaped cutouts in the alum. 200$ for the set, w/o tires. ( can get cheapies to throw on if needed. ) The front driver side wheel has the cutouts painted black, and is missing the center cap ( i'll probably just buy another wheel at the yard, and sell this one as a spare )
My prices are by no means firm, i'm willing to ship anything ( may be expensive though! ) and will be at buyers expense.
i have a front and rear bumper in spotless condition, other than a chip taken out of the lower valance on the Front bumper, and a few nicks out of the plastic in the rear bumper, Asking maybe 200 for the pair?
( don't mind the action shot! Haha )
Passenger side door, 50$ Without the guts ( window included
the stock 60/40 spit bench seats ( Driver side is cut down to a "40" so you can fit a full length center console in there. ) 75$ For the pair
(Before they were cut down )
Stock Headlights and corner lights, 70$ for both
a 7ft bed with a hole cut for a fuel cell. ( needs the corners by the bumper patched.. i may patch them and do the body work.. ) This is negotiable, definitely...
Will have some stock interior pieces F/S, Lemme know what you need and i'll let ya know if i have it ( if not, i can probably find it at the yard. ) There's a pic of the interior under the seats.
and a Pioneer 10" Sub, BRAND NEW in the box still.. 60$ Rated for i believe 500 RMS and 1000 Max Dont have a pic of this one, Can get one if you're interested though!
And the factory alum. Rims off of a 93-97 Ranger.( these are the "teardrop" Shaped cutouts in the alum. 200$ for the set, w/o tires. ( can get cheapies to throw on if needed. ) The front driver side wheel has the cutouts painted black, and is missing the center cap ( i'll probably just buy another wheel at the yard, and sell this one as a spare )
My prices are by no means firm, i'm willing to ship anything ( may be expensive though! ) and will be at buyers expense.
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: Expo 5.0 parts + 4.0 ranger parts - OH
The SuperDookie Ranger
OLD - Engine & Drivetrain
25
03-20-2012 09:17 AM
mikerider
OLD - Interior, Exterior, Electrical, & Misc.
10
12-10-2011 01:50 PM
Hillyard
OLD - Suspension, Tires, & Wheels
22
10-05-2009 10:02 PM
USMCWHITENER
OLD - Engine & Drivetrain
4
05-02-2009 12:25 PM