2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Racing Idle when Clutch Dis-engaged

Thread Tools
 
Search this Thread
 
Old Mar 29, 2017
  #1  
bka0721's Avatar
Thread Starter
|
Member
Joined: Jan 2016
Posts: 31
Likes: 0
From: Boulder, CO
Racing Idle when Clutch Dis-engaged

I have a 2004 3.0L V6 Edge.
Just recently the Engine begins over revving when I push the clutch pedal in. that is when the engine begins to over rev, slowly climbing. When I come to a stop a second or two the engine over revving returns to it's resting idle speed.

Just did a search to see if there is something like this happening to others and have not found similar idle over revving issues.

Any Help appreciated.

bryan
 
Reply
Old Mar 29, 2017
  #2  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Well manual transmission Rangers should "hold" RPMs when shifting, and RPMs should stay above 1,200 until speedometer is under 5MPH
That is normal, it lowers emissions.

The "holding" RPMs should only last 5 to 10 seconds, so if you leave clutch pedal in while above 5MPH the RPMs should drop to around 1,200 after 10 seconds.

I would first test for a vacuum leak
Warm engine up to operating temp, and let it idle, should be about 700rpm
Unplug the IAC(idle air control) Valves 2 wire connector, valve will close and RPMs should drop to 500 or engine may even stall, either is good it means no vacuum leaks.
If RPMs stay 700 or higher then you have a leak.

Also get your VIN(windshield plate or drivers door sticker) and call or stop by a local Ford Dealer, give them the VIN and have them see if there is a newer Software for your 2004 computer, there were some models that had revisions to the software because of your symptoms.
You would have to pay for this fix in most cases, but you won't solve the problem without it so..........
 
Reply
Old Mar 29, 2017
  #3  
bka0721's Avatar
Thread Starter
|
Member
Joined: Jan 2016
Posts: 31
Likes: 0
From: Boulder, CO
Thanks RonD. I've got some direction to check, thanks to your info!

b
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thomasgabel55
General Technical & Electrical
0
Aug 23, 2016 12:51 PM
Jhodapp
Drivetrain Tech
1
Feb 8, 2015 07:56 PM
karlribbon
SOHC - 2.3L & 2.5L Lima Engines
21
Dec 7, 2010 09:13 AM
Sudden Impact Racing
SOHC - 2.3L & 2.5L Lima Engines
7
Feb 18, 2008 05:03 PM
CaliGold
SOHC - 2.3L & 2.5L Lima Engines
5
Sep 3, 2006 12:19 AM




All times are GMT -6. The time now is 01:22 PM.