General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Need Help p0172 rich code 80+ psi fuel pressure

Thread Tools
 
Search this Thread
 
Old Nov 28, 2019
  #1  
Richard1316's Avatar
Thread Starter
|
Member
Joined: Nov 2019
Posts: 9
Likes: 0
From: SPRINGTOWN
Need Help p0172 rich code 80+ psi fuel pressure. Fuel pump/regulator? Injectors?

My truck is a 2011 2.3 ranger

I'm still kind of a noob when it comes to working on vehicles. I am an HVAC technician by trade though so I am naturally mechanically inclined and need help determining what my next repairs should be.

The past month or so I would get a check engine light (P0172 Rich code) that would pop on every now and then. This whole time I've been noticing that the truck would start fine in the mornings and after work, but as soon as I pulled onto the road and gave it a little gas it would lose all power and then steadily get it back as I drove for the next minute or two. Now the past few days I have been noticing that same lack of power when getting going, but furthermore, the truck is now taking probably 6-7 seconds of turning over to get it going (the prolonged turning over only seems to happen after it's been driven for a while and sits in the off position for about 10-15 minutes or so) I checked the fuel pressure at the rail and it's running about 83 psi or so which I understand is not normal, I also found that when it is taking forever to turn over, the fuel pressure will start out barely pushing about 5 psi or so and slowly move up to about 15-20 psi and then all of the sudden it shoots straight up to 80 once fired up. One other thing I have noticed is that my engine is taking quite a while to get up to temp, especially with the heat on.
My code reader does not have live data, but when I pulled the code it displayed STFT at -3.1 % and LTFT at -23.4%

So far what I've done:
  • Change fuel filter
  • Changed all spark plugs
  • Found oil on the two of the plugs so I changed the valve cover gasket
  • Intake manifold gasket kit for the plenum
  • I have ordered a new thermostat but it will be Monday before it gets here

What should I do next?

I was thinking maybe I have a bad fuel pressure regulator or pump but none of the stores had one in stock, and I also thought maybe I should change out my injectors to be safe also.

Any help would be greatly appreciated.
Thank you guys for reading


 

Last edited by Richard1316; Nov 28, 2019 at 02:44 PM.
Reply
Old Nov 29, 2019
  #2  
01Mazda4x4's Avatar
Member
Joined: Oct 2019
Posts: 29
Likes: 0
From: Manitoba
Sounds like a FPR to me.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
abarlazyp
4.0L OHV & SOHC V6 Tech
0
Aug 22, 2019 04:50 PM
FordRangerDude
2.9L & 3.0L V6 Tech
1
Aug 20, 2019 09:32 AM
M90
2.9L & 3.0L V6 Tech
0
Oct 9, 2017 03:12 PM
mred3
4.0L OHV & SOHC V6 Tech
25
Apr 13, 2016 09:16 AM
jason77
Exterior Semi-Tech
12
Mar 10, 2008 07:15 AM




All times are GMT -6. The time now is 11:52 PM.