All i need is one bolt, My cab bolt decided to snap after some harsh articulation 2 days ago! A big LOUD SNAP!!!!!!!!!!!!!!!!!!!!!! Do any of you have a spare bolt sitting around for a 3" body lift ??? or know where i can get one? I hate it when the passenger rear corner comes up and slams down. Def Not safe. Any help would be great!?

 

i have a few extra bolts.....tell me what length and diameter they are and when i get home from work tonight i will look to see if that is what i have

 

That would be great. Aren't they all the same length? Jw Idk? I can get a close measurement. I'll have to take the snaped bolt out to do so. The block is staying in place by the bolt being stuck through it. If i can't get the bolt out i may have to get another lift block. because I'll just cut it in half and replace the whole thing?

 

if you have to cut the block, i have an extra one of those also.......get me a rough lenght of the bolt and diameter and i will let you know after work...

 

ok I'll give you one hopefully by lunch time. But I think all the bolts are the same length. could be wrong. I'll take the extra block also.

 

oh oh, i need one too. the one that goes at the head of the bed. the longest ones in the kit.

 

i am guessing that you are talking about bolts right? i dont have one of the long ones i dont think but i will look for ya....

 

yeah mine is the passanger rear cab bolt. ima go get a guess-met measure

 

****ty deal..i have blocks but no bolts..id try a hardware shop or call PA or wherever the lift was bought and im sure theyd send you new ones..

 

Was the broken bolt grade 10.9 ? ......stock is 10.9 in the cab and 9.8 or whatever is same as grade 5 in the bed . I just did my 1" BL with all 10.9.....

Finding hex bolts that long in grade 10.9 will be tough but any local nut and bolt place can probably order it . you can get a fully threaded bolt that is plenty long and you can cut off any excess after you tighten it up(do not damage threads whan cutting it so u can easily remove it someday if you need to).

The BL how to on TRS gives all the bolt lengths for 3" BL. if u can't find it message me for the link.

 

Anyone still got em? It's nice outside now and I have been tinkering on the truck like crazy!

 

still have mine.........don't know which bolt you need, but i have a few...

 

Wanna send them all? I don't care. up to you?

 

let me take a picture for you when i get home to show you what i got! then you decide if you want them

 

ok lemme know

 

i got 2 bolts and 2 blocks left......if you want, i can bring them to Baltimore with me....if you can wait that long

 

i've also got 2 bolts and 2 3"blocks. the bolts measure 12mm x 180mm. anyone need them, let me know.

 

Are the bolts 2 different sizes?

 

no the bolts are the same sizes....

 

Um ok.............um Im going to go out in the parking lot and get a guess measurement of the length of the one I nedd. I didn't know there were different size bolts for the 3" body lift. if you could get a measurement as well that be grrrrrrrrreat!?

 

i can do that.......when i get home from work...