Is it possible to fit 35/12.5's on a 2wd edge, with a 3inch BL, t-bar crank, and chevy shackles in the rear? I want to run 35's, but not sure if its possible with only one half of the lift.

I'm asking because the 35's aren't but 25 bucks more per tire, and in the long run I'm going to do whatever half of the lift, and want to run 35's then, so if I could go ahead and get them to begin with it would save me money in the long run.

Thanks for any help.

 

John fit 35's on just spindle lift... idk about body.. maybe... some guys have been posted before...

 

I had 35s on 15x8 rims on mine with just a bodylift and torsion bars turned up. It rubbed just a little on the inside of the fender flare on tight turns when you would hit a bump

 

since its extremly hard to find a tire in this size 33x10.5-16 is there a way to turn this into the normal tire size so i can search around for prices on tires? do that tire size turn into 285/75/16? is there a way to break down the sizes? im confused.. and acording to the sticky at the top of this section this size will rub..

 

Not sure if this is what your looking for..

http://www.redrock4x4.com/tech/tire_calc.php

 

285x75x16= 33x11.50
255x85x16= 33x10.50

 

perfect thats what i was looking for thank you. now the other question i have is will this fit on my stock rim? and where is the best place to buy these tires? im looking for BFG A/T's

 

Yes they will fit on a stock rim, I running 285's on stock sport trac wheels. As for the BFG summit price matches.

 

I had 35's with a 3" Fabtech lift and 2" AAL in the rear. No cranked torsion bars, but I did have front fiberglass fenders.

Brenton

 

throw a body lift on..spindles aals and youd be set..ive got the aals that you can have..

now just get spindles and a body lift..

 

do the spindles and aal, if you rub either get a 3inch or 1inch BL