Did a few mods to the GT...; )
#1
#4
#8
It is already lowered. If you look you can see my dirty Tokico 5-Ways hanging from the CCs, not pictured are my H&R Race springs. I am running no isos in the front and one iso in the rear. Also not pictured are my bump steer kit and a few other things.
#9
#11
#16
Just a few odds and ends that need to be taken care of. Both heads are going to the machine shop for some work, bottom end is getting freshened up a bit with some new stuff here and there, timing chain and gears redone, trans is getting freshened(new fluids, check gears, it was rebuilt like 2k ago), all the fluids flushed, rear gear fluid, new u-joints, and a few other things. All work while the heads are at the machinist.
#21
Forgot to mention that the tune will be changed a bit...nothing too radical but still changed.
#22
#23
#24
in my 94' one day i was going up the mountain up interstate 77 and i noticed my 4 banger was weaker than usual (i usually couldnt maintain 55 up the mountain in that ol truck on a good day) well i couldnt maintain 45 onthis day, but i got to where i was going...
on my way back, something popped, and all of a sudden the truck started running HARD, i pulled over and i popped the hood, at first, i didnt notice anything, then i seen that the liner underneath the hood (whick WAS perfect) now had a damn hole in it! then i got to looking and there i seen it, one of the sparkplugs was dangling by the plug wire....
i looked closer and all that was left to the plug was the ceramic part!, luckily, it just blew that part out of the metal threads, they were still in the block (all i had to do was put a socket to it and they came out)
i had never seen anything like tht!
on my way back, something popped, and all of a sudden the truck started running HARD, i pulled over and i popped the hood, at first, i didnt notice anything, then i seen that the liner underneath the hood (whick WAS perfect) now had a damn hole in it! then i got to looking and there i seen it, one of the sparkplugs was dangling by the plug wire....
i looked closer and all that was left to the plug was the ceramic part!, luckily, it just blew that part out of the metal threads, they were still in the block (all i had to do was put a socket to it and they came out)
i had never seen anything like tht!