My newest mods
#1
My newest mods
After sinking my truck in some water (check avatar and first pic) my carpet had to be removed. I figured why not herculine the floor and make a large floor mat out of the carpet for easy removal (pics to come later). Well that was over a year ago. I soon added herculined interior floor to my things to come list in my sig. I will finally be able to remove that. I have added things to my list and finished them all the while the herculiner stayed on there. To add to more of my procrastination I got a free half gallon of Herculiner from Doc in the summer. I finally busted the can open today and got the job done. It was a fairly easy job. Much easier than when I did the bed but I won't go into that. Onto the pics.
Notice how mangled the top of the can is. The herculiner sealed the lid to the can. It was impossible to get them apart.
I was very happy to be finally doing this.
Tied the wires up to keep them clean. But the tabs holding the harness to the floor all broke.
Finished product.
I recently picked up a set of driving lights for free from Brit_Ranger (great guy and amazing carpenter). I installed them last week but didn't get pics taken till today. They are very bright brighter than the high beams. Great for night time wheeling I can't wait to test them out. It also has 7 color LED halo that is a cool feature but I am going to be careful because I don't want a ticket.
Put them behind the grill.
Three new switches. The chrome one is for the other mod that doesn't really get any pics but was most important. I got a Griggs fan controller from Winks back in January. Winks is a good guy. I was lazy about installing it but got it done along with everything else. Thank you Winks and Griggs.
I will post a video of the lights when it finished uploading.
Notice how mangled the top of the can is. The herculiner sealed the lid to the can. It was impossible to get them apart.
I was very happy to be finally doing this.
Tied the wires up to keep them clean. But the tabs holding the harness to the floor all broke.
Finished product.
I recently picked up a set of driving lights for free from Brit_Ranger (great guy and amazing carpenter). I installed them last week but didn't get pics taken till today. They are very bright brighter than the high beams. Great for night time wheeling I can't wait to test them out. It also has 7 color LED halo that is a cool feature but I am going to be careful because I don't want a ticket.
Put them behind the grill.
Three new switches. The chrome one is for the other mod that doesn't really get any pics but was most important. I got a Griggs fan controller from Winks back in January. Winks is a good guy. I was lazy about installing it but got it done along with everything else. Thank you Winks and Griggs.
I will post a video of the lights when it finished uploading.
Last edited by bryanjints; 04-05-2008 at 09:29 PM.
#6
#10
I do want to someday convert to manual. I didn't do a good job of prep around that area for that reason. It is tough stuff but I will cut it with a razor blade and take the plate out. And if worse comes to worse I will just get out the angle grinder.
Thread
Thread Starter
Forum
Replies
Last Post