My trucks changed quite a bit... and some fishing :) (TON of pics..)
#1
My trucks changed quite a bit... and some fishing :) (TON of pics..)
I havent posted any pictures of my truck lately but since last post my we've taken the superlift and 35's off of my truck...
First, Stock
Then, Superlift and 33's
Then, Superlift + body lift and 35's
Now, Body lift and 33's
AND the catch of the day..
First, Stock
Then, Superlift and 33's
Then, Superlift + body lift and 35's
Now, Body lift and 33's
AND the catch of the day..
Last edited by Kevooo; 07-09-2008 at 12:46 AM.
#4
It's in chronological order lol.... stock, then SL and 33's, then SL+BL and 35's, now BL and 33's....
#11
Always has been good lookin, she has. The truck too. I bet its alot easier towing isn't it?
Sorta side topic......the superlift skid plate........is it basically a flat piece of sheet with a bend to cover the ugly azz superlift crossmember? Does it span the front crossmember to the back? I need to make one.
Sorta side topic......the superlift skid plate........is it basically a flat piece of sheet with a bend to cover the ugly azz superlift crossmember? Does it span the front crossmember to the back? I need to make one.
#14
#15
#19
Thanks for all the compliments.. i took the superlift off because it just couldnt handle the way i drive my truck, it put to much stress on all my components, all the ball joints were bad and both wheel bearings were bad and just a bunch of other stuff... the lift was great, but not for 35's IMO, if i run 35's again it will be with a SAS.. also with the superlift my rear DS would hit my gas tank at 80mph+ and over big bumps and sharp turns, no idea why, and i needed to regear to 4.56's, so it was just more economical to just sell the superlift.. but at the same time i think it drove better on the 35's than it does now, theres still a few things that need to be fixed...
Fx4Wannabe - I still have my SL skidplate if u want it, it covers the whole superlift dropped crossmember, and it just has that bend up in the front with the logo on it... it was nice but i took it off because it didnt fit with the stock skidplate which i like better. but if you make one dont curve it up too high in the front if u want to run the stock skid...
Fx4Wannabe - I still have my SL skidplate if u want it, it covers the whole superlift dropped crossmember, and it just has that bend up in the front with the logo on it... it was nice but i took it off because it didnt fit with the stock skidplate which i like better. but if you make one dont curve it up too high in the front if u want to run the stock skid...
#22
It was a tough decision, but i love the power i got back with the 33's... and i liked it best on 35's when it had no problems!
Thread
Thread Starter
Forum
Replies
Last Post
Crein2009
General Ford Ranger Discussion
6
05-24-2009 10:42 PM