does anybody know the name of the company with contact info,that built the throttle bodies for 94 rangers with a 2.3 litre engine?only according to the ford dealer 94 throttle bodies will work on 94,no other year,i'd love to send it back to the factory for a rebuild if poss,or i can talk them into it,any help would truly be appreciated...thanks

 

rebuild your T-body...?
what for?

 

yea why?? just get a new one they're not the expensive and i think a 2.3 is a 2.3 i dont think theyve changed any

 

i was told they don't make my year throtle body anymore and that only a 94 throttle body will work on a 94,93 or say 95-2008 will not,now if somebody knows better and all 2.3's including any sensors are the same or will work then i'm okay,but i originally was not told that...

 

i know a 93 will work and im sure the 91-94 with the MAF system use the same TB and the same throttle position sensor. Even if the electronics are slightly different it's easy enough to get a new TPS and bolt it on, same with the IAC.

 

call up your ford dealer and tell them you want the number to the discontinued ford parts in ohio. and call them and see what they have to say.

im sure that as long as the location for the throttle cable is in the same place, you could always extend the wires for the tps to fit

 

I do not know the differents but 1994 is alone , 1995,96 maybe others look the same but somethings is different , Ford told me after useing 1995 throttle body , it ran but did'nt run just right and the truck put out many codes. Different's have to be inside , put the 1994 throttle body on and all straightened out.