01 2.5 5speed, NO electrical power at clutch safety switch ?? truck ran fine no indication of any problems, went to start this morning nothing no click not anything ALL lights,gauges,radio, everything works, NO START i moved clutch safety switch back and rotated up truck started about 10 times i moved switch back no start so i rotated back up it starts. so got new switch NO START?? put old switch back no start. Now no power at switch connector, Fuse,Relay,Starter and Battery are Good. ANY Ideas would be apreciated Thanks.

 

Fuse #24 (cab) ONLY has power from the ignition switch in the Start (crank) position.

If you don't get power at pin 6 (WH/PK wire) of the clutch switch with the ignition switch in the Start (crank the starter) position, your ignition switch is bad (or fuse #24 is blown).

Fuse 28 shares that same power feed through the ignition switch Start position, so if fuse 24 socket has no power, neither will fuse 28 (confirms bad ignition switch, Start position contacts).

 

NEW Ignition switch NO START, then check starter no current at selenoid with ign. in start position and none at clutch switch ???? I AM LOST.

 

did you check the big fuse in the main disto box under the hood for the entire ignition system???

 

fixed, broke wire going to clutch switch.

 

thats good, did the wire get caught in the hinges on the pedal

 

NO wire not broke that you could see, 12 volt at fuse, 3.6 at switch. about 3inch back from switch we had 12 volts. Replaced wire fuse to switch, you could not see anything from looking at insulation on wire that it was bad inside.

 

ahh i see anyways good its fixed even though it happened a month ago lol

 

a week of testing wires after work in evenings. Too much fun,

 

ohh believe me i know just how much fun that is, i just can't get enough of testing wires inder the dash of cars, sooo easy to work with and you have so much space, lol