Help w/ my ignition problem. i need truck 2moro please
 

Well i had a bad ignition module cuz i had a spout fault. truck ran fine just a little rough. i have a 93 mustang 2.3L which ran perfect and i switched over the module and the car had no more spark. put the old one back on and still no spark. wierd.... i put both modules on the mustang and mustang has no spark.

i thought i shorted the modules somehow so i bought a new one and still no spark.... i got compression, i got fuel, replaced both coils.

any fuses other than on panel? any ideas please im down two cars?

update: ko test comes to a 111(pass) and timing belt isnt the problem cuz both cars ran 10 minutes before.. checked eec power relay and switched with fuel pump relay and nothing still got fuel pressure but no spark..

Your description of problems is a little hard to follow. It would also help if you provided a little more info on your truck. Have you checked all fuses under hood? Are you getting power to the ICM, coil packs, and CPS with the ign on? Does the injectors power toggle during cranking (test light should blink on and off). Check the coils primary (5 ohm or less) and secondary resistance (13-15 K-ohms). Just throwing out some things to check.