Missing Sensors?
#1
Missing Sensors?
I think I am missing a sensor in the driver side of my block. It's on the 1994 2.3 engine.
There is a hole with a blue o-ring and a few metal rods which appear to hold something that is snapped in. I have a wire hanging which when lifted reaches directly to this hole. I'm taking a guess that whatever was plugged in here somehow fell out. It's just below the oil filter. I will add some pictures for reference.
Any help would be greatly appreciated.
Imgur: The most awesome images on the Internet
There is a hole with a blue o-ring and a few metal rods which appear to hold something that is snapped in. I have a wire hanging which when lifted reaches directly to this hole. I'm taking a guess that whatever was plugged in here somehow fell out. It's just below the oil filter. I will add some pictures for reference.
Any help would be greatly appreciated.
Imgur: The most awesome images on the Internet
#2
RF Veteran
iTrader: (1)
Looks like the Oil Level sender, and it looks OK, not broken
The wire end should just slide into it, if not then end may be bad
Drawing here of placement: http://i.ebayimg.com/00/s/MzY2WDU3NQ..._id=880000500F
Image of sender here: https://cfc7329ad537523a5de1-b21544d...6624a_7080.jpg
Wire end should look like this: http://i.ebayimg.com/images/i/131578...-1/s-l1000.jpg
The wire end should just slide into it, if not then end may be bad
Drawing here of placement: http://i.ebayimg.com/00/s/MzY2WDU3NQ..._id=880000500F
Image of sender here: https://cfc7329ad537523a5de1-b21544d...6624a_7080.jpg
Wire end should look like this: http://i.ebayimg.com/images/i/131578...-1/s-l1000.jpg
Last edited by RonD; 02-27-2017 at 11:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post