SAS done...crossmember issues
#1
SAS done...crossmember issues
D30 swaped in in less than a day things went really smooth up til the trans crossmember.
There is no room for it I have some 2" square tubing holding it up for the moment, but I know that cant stay, Has anyone ran into this before? but between my long arms, t-case and front driveshaft, theres no room on the left, and with the 2 cats on the right space is limited, I'll post up some pics soon as I get them off the camera, but this is gonna have to be some tricked out crossmember.
There is no room for it I have some 2" square tubing holding it up for the moment, but I know that cant stay, Has anyone ran into this before? but between my long arms, t-case and front driveshaft, theres no room on the left, and with the 2 cats on the right space is limited, I'll post up some pics soon as I get them off the camera, but this is gonna have to be some tricked out crossmember.
#4
I have Rusty's off road high clearence arms, I'm about 2" past where the skyjacker extended arms were on the ttb, and also pusher the d30 forward about 2 1/2". I could have prolly moved the arms back another inch with out any issue as far as that part. I'm thinking mayby an "X" type cross member with a drive shaft loop in it to clear the front drive shaft, and that should give me enuf strength to hold every thing up where it needs to be.
Thread
Thread Starter
Forum
Replies
Last Post
Jwad00
Suspension Tech
9
12-17-2011 02:40 PM