Confirmation needed...
#1
Confirmation needed...
Can these be installed onto my 2006 XLT supercab? Thought I read somewhere that they're compatible.
Skyjacker Suspensions FR36 - Skyjacker Softride Lift Leaf Springs - Overview - SummitRacing.com
Edit - I hastily put up this post without giving details. I lifted my truck a few years back and did it the cheapest way possible. It was \ is a SpringTech lift kit with a 4in block in the rear. There is no more stock block just the block that came with the kit. If I replace the block with the leaf springs above will my truck sit even with the front? Is the above what I'm looking for?
Skyjacker Suspensions FR36 - Skyjacker Softride Lift Leaf Springs - Overview - SummitRacing.com
Edit - I hastily put up this post without giving details. I lifted my truck a few years back and did it the cheapest way possible. It was \ is a SpringTech lift kit with a 4in block in the rear. There is no more stock block just the block that came with the kit. If I replace the block with the leaf springs above will my truck sit even with the front? Is the above what I'm looking for?
Last edited by DviousDave; 06-28-2012 at 01:48 PM.
#4
I usually stick to the application on the parts. Depending on certain years, shackle widths may be different, length may vary. Your best bet is (if you can) hit a junk yard and measure out the hangars of a 91-97 and measure the length as well and go from there. Or ask a member on here to measure that has that year ranger. You can also look into swapping in Explorer leafs, that may do what you need
Thread
Thread Starter
Forum
Replies
Last Post
OneTireFire
General Ford Ranger Discussion
3
04-15-2010 06:34 AM
FireRanger
Ranger-Forums Office
1
06-10-2004 09:25 PM