superlift
#3
#5
Join Date: Apr 2007
Location: Corvallis,OR
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
#6
superlift will give you u a break line bracket that remounts the line to reach. i donno how tight the line actually is tho. i've got longer stainless lines that are being sold with the superlift cause i cant use them with my new axle. i dont no exactly what superlift puts in the kit.
#7
it will work just fine. i have an '08 that i just put a superlift on. the only fit issue was the torsion bar skid plates wouldnt fit on the torsion bar drop bracket, the holes on the plates wouldnt line up with the holes on the bottom of the bracket. i was gonna drill new holes, but didnt.
#8
again, check the back of the knuckle on the superlift kit, if its got the 4 holes right next to each other your brakes will work, if it does not you will need new 01-02 rotors. its the only difference. easy swap too.
brake lines should be resolved with a bracket that comes with a kit.
i think i have installed 5 superlift kits now?
brake lines should be resolved with a bracket that comes with a kit.
i think i have installed 5 superlift kits now?
#9
Join Date: Apr 2007
Location: Corvallis,OR
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
#10
again, check the back of the knuckle on the superlift kit, if its got the 4 holes right next to each other your brakes will work, if it does not you will need new 01-02 rotors. its the only difference. easy swap too.
brake lines should be resolved with a bracket that comes with a kit.
i think i have installed 5 superlift kits now?
brake lines should be resolved with a bracket that comes with a kit.
i think i have installed 5 superlift kits now?
Are you talkin' about the caliper mounting bracket that bolts to the knuckle? I remember carrying over the hub and caliper bracket to my new superlift knuckles....I had 4 threaded holes in my knuckles. Is that what your talking about? the four threaded holes for the caliper mounting bracket bolts?
Yea....Cory...if you need them, my old rotors are yours. Soon as my slotted ones from Alon gets here.
I know the front brake lines, Superlift gives you drop brackets. I still havn't made some(bought it used as well). But it's basically an S shaped drop bracket. The rear I believe is left stock.
#11
Thread
Thread Starter
Forum
Replies
Last Post