Anyone w/a BL
#1
Anyone w/a BL
I am trying to decide if I want to put a 1 or a 2 inch body lift on my truck. I was wondering if any one had pictures of their truck with either a 1 or 2" BL. I mainly want to see what the gap[ looks like and how noticable it is. I plan on running 32's on my truck after I put the BL on and I know 32's will fit now but I want the extra height. Thanks guys!
#5
#8
#9
i say go with the 3 inch one , in my opinion if your going through all the trouble of putting a body lift on just go ahead and do it as high as u can i have 3 inch body lift on mine and i love it
and what gap are you worried about? if its the one under the bed its no problem you can get gap guards or make them yourself out of some rubber
and what gap are you worried about? if its the one under the bed its no problem you can get gap guards or make them yourself out of some rubber
#10
I really don't want to do the 3 because I don't want to run 33's, I've ran 33's on a ranger before and it was just to big a tire for the truck, in my opinion. I have also ran 32's on a ranger and thought that they were the perfect tire size for what I do and they didn't seem to drain much power. I already have 1.5 to 2" from putting AAL's on and tweaking my t-bars. I just want another 1-2" to eliminate all tire rub, which won't be much with 32's, and to make my truck sit just a little taller. I've already researched it and doing a 1-2" BL is just as easy as the 3. For a 1-2 I don't have to extend anything and the bumpers won't look to bad either after I adjust them. I will be able to put a 1-2" BL on my truck for under $100 compared to $300 for the 3. I just wanted to see if anyone had any pics of a 1 or 2" BL to make my decision a little easier. I guess I will just have to get out my jacks and jack my truck up 1" and see how I like it and then jack it up another inch and see which one I like better.
#12
Originally Posted by 4x404Edge
Thats what they make gears for!!!
Thread
Thread Starter
Forum
Replies
Last Post
Fx4wannabe01
General Ford Discussion
16
08-31-2010 08:52 AM