Coilover Brackets by ME00stepside (NO LONGER AVAILABLE AS OF 7/23/2021)
#1026
#1029
#1030
#1031
#1032
#1033
#1038
#1040
OK guys, all from this run are spoken for, but you can start another list for the next run if you want. I have another project running (not for Rangers) next month, so I believe July or August would be when I could expect the next run to take place if the interest is there.
SteelDirigible - Powdercoated
RLong31 - Powdercoated
Brandon22685 - Powdercoated - paid
FFBill - Raw
Jatha05 - Raw - paid
bigmoon - Powdercoated - paid
moonliteshawn - Powdercoated - paid
tylerbird - Raw
ecrase2500 - Powdercoated - paid
Jared152 - Powdercoated
I'm picking up the brackets Monday, and dropping them off at the powdercoat shop. The hardware should be in before the brackets are done being coated, so I should start shipping these about the 27th or 28th.
Stay tuned!
SteelDirigible - Powdercoated
RLong31 - Powdercoated
Brandon22685 - Powdercoated - paid
FFBill - Raw
Jatha05 - Raw - paid
bigmoon - Powdercoated - paid
moonliteshawn - Powdercoated - paid
tylerbird - Raw
ecrase2500 - Powdercoated - paid
Jared152 - Powdercoated
I'm picking up the brackets Monday, and dropping them off at the powdercoat shop. The hardware should be in before the brackets are done being coated, so I should start shipping these about the 27th or 28th.
Stay tuned!
#1045
#1047
It didnt go as planned. rob and I (mostly him) spent like 8 hours. I need an alignment and to install the limit straps/bumpstops. It rides better though, I noticed it right away, no clunk clunk sounds
I think the powdercoat added to the thickness so fitting the shims was difficult. Rob grinded the larger ones down to make it fit.
I'm extremely gratefull for robs help.
I'll post pics later in my build thread.
I think the powdercoat added to the thickness so fitting the shims was difficult. Rob grinded the larger ones down to make it fit.
I'm extremely gratefull for robs help.
I'll post pics later in my build thread.
Last edited by morris; 05-19-2013 at 11:53 AM.