dumn question but no harm in asking
#1
dumn question but no harm in asking
alright i go coil boosters and i really need the higher setting but could only get the lower side in, is there anyway to spread the coil springs apart or am i missing something with putting these rubber coil boosters in, this was just the last resort before going for a lift which will have to wait
#3
#4
yeah i dindn't think the metal ones would be the best either, and they seem to be working out well i might put another set in eventually but i have enough tire clearance and spring stiffness for normal driving the tire only hit once and it barly hit, it was on my friends lane, on a realy bad bump at the bottom of his part of the driveway were it comes off a really steep hill
#5
Yeah, I ran those adjustable in a previous vehicle, they never stayed in, and the bolts just bent, and I was using high grade bolts too.
I'm considering putting another set in, I'm afraid it might stiffen the truck too much. We'll see, luckily they're easy to put in and take out.
Tires rubbing has to be one of my most hated sounds, aside from knocking. haha
I'm considering putting another set in, I'm afraid it might stiffen the truck too much. We'll see, luckily they're easy to put in and take out.
Tires rubbing has to be one of my most hated sounds, aside from knocking. haha
#7
#8
yeah and the rubber boosters do stiffen it a little, but not too much, and unless your coild springs are bigger than mine they are a pain in the *** of mine, the rubber ones i got from AA had a short way 1" and long way 1.5" to fit the short side in with my ****ty *** coil springs i had to have my girl friend stand on a crow bar to pull the axle down, and i barely got them in, and i needed the long side so my buddy helped me and he had a good idea put a floor jack between the radial arm and the frame, worked if you took it too far it pulled the whole coil spring down on your hands so we renforced it jaked it up to a safe lever and used a giant ****in screw driver to pry the springs apart more, so a few hur fingers and 4 boosters later we were done, and yeah rubbing tires is a horrible sound, especially new tires.
#10
#12
Hockey pucks are known to cause cancer, to the State of California.
Yeah, I just put two more of the rubber in last night, I wanted to use the 1.5" side like the ones that were already in there, figure it couldn't hurt, well I could barely get them in on the 1.2" side.
It was a nightmare.
I tried everything to speard those coils, even those adjustable ones to spread to get the rubber in and nothing would do it, my girlfriends weight wouldn't even move the damn axle, the TTB's bottom out before anything, I unbolted the sohck and spring where it wasn't even in the truck really and still nothing. I should have just gone with the spacers on the axle while i had the srping out...
I even used a set of coil srping compressors above the coil I wanted to put them in and I just couldn't get 'em in at 1.5".
I'm just gonna lift more when I go D35.
@DangerRanger, I for the life of me couldn't figure out the theCrazyDego was on xbox last night. It was tripping me out. haha It showed you coming online all the way through my movie.
Yeah, I just put two more of the rubber in last night, I wanted to use the 1.5" side like the ones that were already in there, figure it couldn't hurt, well I could barely get them in on the 1.2" side.
It was a nightmare.
I tried everything to speard those coils, even those adjustable ones to spread to get the rubber in and nothing would do it, my girlfriends weight wouldn't even move the damn axle, the TTB's bottom out before anything, I unbolted the sohck and spring where it wasn't even in the truck really and still nothing. I should have just gone with the spacers on the axle while i had the srping out...
I even used a set of coil srping compressors above the coil I wanted to put them in and I just couldn't get 'em in at 1.5".
I'm just gonna lift more when I go D35.
@DangerRanger, I for the life of me couldn't figure out the theCrazyDego was on xbox last night. It was tripping me out. haha It showed you coming online all the way through my movie.
Last edited by nickskates4lyfe; 03-25-2011 at 05:00 PM.
#13
haha ****ing california, look at my jerry rig lift thread and you'll see what i mean, lol
anyways they were a ***** but a floor jack between the radial arm and frame works great and then a crow bar the rest of the way, just hurts your fingers when the crow bar slips, lol my knucle is still stiff
anyways they were a ***** but a floor jack between the radial arm and frame works great and then a crow bar the rest of the way, just hurts your fingers when the crow bar slips, lol my knucle is still stiff
Thread
Thread Starter
Forum
Replies
Last Post
03SonicEdge
General Ford Ranger Discussion
7
06-10-2007 12:06 PM
Fx4wannabe01
General Technical & Electrical
32
03-02-2006 04:40 PM