For a Ranger EDGE Supercab that ALREADY has a Tbar crank putting it about 1/4 of an inch HIGHER in the front than the rear planning on adding a 3 inch (Not 3.5) Pro Comp Spindle lift which DEAVER spring pack will I need to yield either level, or less than 1/2 inch higher front lift from the rear?

I'm looking for the pack to give that height, and the imrpoved every day ride quality I hear about. Any help would be greatly appreciated. (PS I think gbgary used to have the exact pack I want on his Ranger...)

 

i thought when you ordered them you just said the added amount of lift. like 3 inches? well plus your blocks so 5 inches? maybe im wrong, but that was my understanding.

 

None. The production deaver packs raise 2.5" with out blocks. For what your going to be using it for I would recomend the Deaver Pre-Run pack. All you would have to do is flip your stock shackles.

 

I have the prerunner pack and I am level with my spindle lift. All I had to do was take out my blocks.

 

If you do not flip the shackle you will get Gary's result, which is like 2.5" of lift w/o block.

I will have my set off the Ranger within two weeks if you want them. They have about 2-3k on them, only about 3 months of driving. I put them on about 2 months before I deployed. Looking to get about 250 plus shipping.