so if i crank the t-bar
#1
Join Date: Jun 2008
Location: newark, oh
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
#2
assuming you have a 4x4 or edge, You MIGHT get 2" out of the front bars. Each truck is different. However, you will notice you already have a 2" block back there. Most i've seen from a torsion crank is leveling out of the truck, an added 2" to the back will bring the tail up, even with a torsion crank.
I've seen that 33x10.50 with the right backspacing is max with a torsion crank without rubbing.
I've seen that 33x10.50 with the right backspacing is max with a torsion crank without rubbing.
#4
You'd scrub the rear of the front fender flares at full lock, but you can trim that easy to where it looks like it should be made like that. You already have a block in the back but if you were to level it out with the t-bar crank you could fit. The rear would fit fine as it is, no problems. Just crank the bars and trim the flares, I can post pictures of how and where to trim if you want.
#7
#8
Join Date: Jun 2008
Location: newark, oh
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
#9
#10
Hey brian, Im runnin a 285/70-17 which is like a 32.8 X 11.3 err something.... I cranked my t-bars I think 4 turns to level it out.
Heres cranked 4 turns before the 285's...
Heres after with the 285's (the concrete and the gravel are different, thats why it dosnt looked cranked)
Minor rubbing, just at full turn.
Heres cranked 4 turns before the 285's...
Heres after with the 285's (the concrete and the gravel are different, thats why it dosnt looked cranked)
Minor rubbing, just at full turn.
#12
Join Date: Jun 2008
Location: newark, oh
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
#13
Join Date: Jun 2008
Location: newark, oh
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
thats actually the look im going for, all blacked out. are those jeep rims?
i would actually like to have sully's rims witha little bit of chrome to match my step bars, but i cant afford those i think im going to buy a set similar to yours but chrome and paint them black or powder coat them at work, i can get them for 75 bucks off my buddy's jeep wrangler
i would actually like to have sully's rims witha little bit of chrome to match my step bars, but i cant afford those i think im going to buy a set similar to yours but chrome and paint them black or powder coat them at work, i can get them for 75 bucks off my buddy's jeep wrangler
#15
Brian, I got a set of 5 285/70-17 BFG's on craigslist for $175 for all 5... Whenever you find a deal, go for it man! Oh, I got my wheels which are 17X8 Ion 136's for $125 a peice.... Alot cheaper than I thought they would be. I wanted something a little bit different and trust me, alot of people turn their heads when I roll by.
#16
Join Date: Jun 2008
Location: newark, oh
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Brian, I got a set of 5 285/70-17 BFG's on craigslist for $175 for all 5... Whenever you find a deal, go for it man! Oh, I got my wheels which are 17X8 Ion 136's for $125 a peice.... Alot cheaper than I thought they would be. I wanted something a little bit different and trust me, alot of people turn their heads when I roll by.
Thread
Thread Starter
Forum
Replies
Last Post