|
fox emolsions and coils for xmas
1 Attachment(s)
like it says i got emolsiom 2.0 with 750lb eidech coils. Im jst trying to figure out how the coils mount on the shock... Maybe im retarded but im just at a lose, cant figure it out lol.... HELP ME!!!! lol Merry Christmas!!!
Attachment 125405 |
lucky dog
|
Nice.
|
take the fitting out and then the top lock ring unscrews, but thats just from looking at it
|
Originally Posted by chevyslayer925
(Post 1558632)
take the fitting out and then the top lock ring unscrews, but thats just from looking at it
|
|
sweet thanks man. i cant wait for these to go on the truck. btw is there a tool to tighten the adjuster to put more tension on the coils??
|
Spanner wrench.
|
does the bottom cup not have a notch to clear the shaft?
|
Originally Posted by Off-roadranger04
(Post 1558634)
thats the fitting to charge it with nitrogen... idk if i take that out if the nitrogen will shoot out lol
Screw off the adjustment and lock nut at the top of the coilover to install the spring. Once the spring is on, you adjust the nuts back down to compress the spring. It is best to use a spanner wrench, like this: Off Road Warehouse - ICON 2 Pin Spanner Wrench - ALL ICON Coil-over Shocks |
SICK!
|
Just noticed, you got a sticker? I didn't get one.
|
Originally Posted by KLC
(Post 1558909)
Just noticed, you got a sticker? I didn't get one.
|
yeah its a pretty cool sticker
|
The spanner wrench didnt come with the shocks?? Maybe its a wierd FOX thing but double check your boxes, they usually do
|
Originally Posted by atrocity
(Post 1558914)
did you check inside the manual?
|
Originally Posted by blkb3
(Post 1558922)
The spanner wrench didnt come with the shocks?? Maybe its a wierd FOX thing but double check your boxes, they usually do
|
Originally Posted by KLC
(Post 1558937)
Fox shocks don't come with them.
|
you know the bottom cup should come loose and come off the shaft. slide the coil on then put the bottom cup back in.
|
Thats a nice X-Mas present.
|
so how do i kno when the tensioners are tight enough????
|
Just depends on how you like it to ride. The tighter the coils, the stiffer the ride. You will be making adjustments for awhile after you install them. Its just a matter of fine tuning to your comfort level.
|
ah gotcha... thanks guys!!
|
You bought coils but you don't even know how to install the spring? Probably was not the right setup for you.
|
ive done my research... they are going on the truck when my buddy clears out his garage!
|
| All times are GMT -6. The time now is 06:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands