07 2WD Lift/Leveling Kits
#1
07 2WD Lift/Leveling Kits
I have found that fabtech makes a 3" and 5.5" lift for my truck but it says that I can not run factory wheels. What other opitions do I have? I want to do either a leveling kit or full lift but want to be able to kit the factory wheels. Also the fabtech kit looks to be set up more like a pre runner lift which makes the front wheels stick out farther than the rear.
Is there anything I can lift my truck with 3" or so, keep factory wheels and not have the front tires stick out?
Links and or part numbers would be great!!
Wayne
Is there anything I can lift my truck with 3" or so, keep factory wheels and not have the front tires stick out?
Links and or part numbers would be great!!
Wayne
#2
#3
#4
#9
i run doetsch race spindles. any spindle means wide track width, because it puts the pin next to the control arm, not above. can run factory wheels, but then you also need wider rims to run anything 32 and up.
i have AR 15x8's with 32's and a 3 inch spindle lift, 4" block and shackle.
and the spindle:
I have a 4" backspacing, so these kick out normaly. heres with the spindles:
and stock same rims:
if you wanna keep track width and are just looking to lift, get a cheap body lift.
by the way, these spindles are tanks. love them.
have tons of pics of everything if you wanna see them.
i have AR 15x8's with 32's and a 3 inch spindle lift, 4" block and shackle.
and the spindle:
I have a 4" backspacing, so these kick out normaly. heres with the spindles:
and stock same rims:
if you wanna keep track width and are just looking to lift, get a cheap body lift.
by the way, these spindles are tanks. love them.
have tons of pics of everything if you wanna see them.
Thread
Thread Starter
Forum
Replies
Last Post
jamesbarber1989
1" & 3" Body Lifts
0
08-13-2014 02:21 AM
Want to Buy: 93 - 97 leveling 2wd leveling kit
tdaws93
OLD - Suspension, Tires, & Wheels
4
06-09-2010 04:20 PM
garciaedgar
1" & 3" Body Lifts
36
09-04-2006 10:33 PM